On 08/26/2011 01:00 AM, smitha.va...@wipro.com wrote: > > Thanks scott. > > There was an issue with the file system. Now my board is up with the > linux boot prompt . > But ping is not working.
You still haven't set your MAC address. U-Boot should be fixing this up in the device tree. > The local loopback ping works. My phy chip > BCM5221 is connected on port A Your device tree describes a connection on port C. You need to update the mdio node's reg to point to port A's registers (0x10d00), and fsl,mdio-pin and fsl,mdc-pin need to be set to the particular pins your board uses. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
