MPC832x does not have enough MURAM to do fixed MURAM allocation.
Change to dynamic allocation.
Signed-off-by: Joakim Tjernlund <joakim.tjernl...@transmode.se>
---
drivers/usb/host/fhci-hcd.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index c7c8392..98adbe8 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -622,12 +622,15 @@ static int __devinit of_fhci_probe(struct of_device
*ofdev,
goto err_pram;
}
- pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+ pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64);
if (IS_ERR_VALUE(pram_addr)) {
dev_err(dev, "failed to allocate usb pram\n");
ret = -ENOMEM;
goto err_pram;
}
+
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB,
+ QE_CR_PROTOCOL_UNSPECIFIED, pram_addr);
fhci->pram = cpm_muram_addr(pram_addr);
/* GPIOs and pins */
--
1.7.3.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
