In the p1023rds, a physical bus of nor flash is 16 bits width.
The bank-width is width (in bytes) of the bus width. So, the
value of bank-width of nor flash is not one, and it should be
two.
Signed-off-by: Chunhe Lan <chunhe....@freescale.com>
---
arch/powerpc/boot/dts/p1023rds.dts | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1023rds.dts
b/arch/powerpc/boot/dts/p1023rds.dts
index bfa96aa..d9b7767 100644
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ b/arch/powerpc/boot/dts/p1023rds.dts
@@ -387,7 +387,7 @@
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x02000000>;
- bank-width = <1>;
+ bank-width = <2>;
device-width = <1>;
partition@0 {
label = "ramdisk";
--
1.5.6.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
