On Aug 11, 2011, at 11:07 AM, Robin Holt wrote:
> Allow the p1010 processor to select the flexcan network driver.
>
> Signed-off-by: Robin Holt <h...@sgi.com>
> Acked-by: Marc Kleine-Budde <m...@pengutronix.de>,
> Acked-by: Wolfgang Grandegger <w...@grandegger.com>,
> Cc: U Bhaskar-B22300 <b22...@freescale.com>
> Cc: socketcan-c...@lists.berlios.de,
> Cc: net...@vger.kernel.org,
> Cc: PPC list <linuxppc-dev@lists.ozlabs.org>
> Cc: Kumar Gala <ga...@kernel.crashing.org>
> ---
> arch/powerpc/boot/dts/p1010rdb.dts | 8 ++++++++
> arch/powerpc/platforms/85xx/Kconfig | 2 ++
> 2 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/p1010rdb.dts
> b/arch/powerpc/boot/dts/p1010rdb.dts
> index d6c669c..df89b60 100644
> --- a/arch/powerpc/boot/dts/p1010rdb.dts
> +++ b/arch/powerpc/boot/dts/p1010rdb.dts
> @@ -171,6 +171,14 @@
> };
> };
>
> + can@1c000 {
> + clock-frequency = <0x0bebc1fc>;
> + };
> +
> + can1: can@1d000 {
> + clock-frequency = <0x0bebc1fc>;
> + };
> +
set them to 0, as we expect u-boot to fill them in.
> usb@22000 {
> phy_type = "utmi";
> };
> diff --git a/arch/powerpc/platforms/85xx/Kconfig
> b/arch/powerpc/platforms/85xx/Kconfig
> index 498534c..c4304ae 100644
> --- a/arch/powerpc/platforms/85xx/Kconfig
> +++ b/arch/powerpc/platforms/85xx/Kconfig
> @@ -70,6 +70,8 @@ config MPC85xx_RDB
> config P1010_RDB
> bool "Freescale P1010RDB"
> select DEFAULT_UIMAGE
> + select HAVE_CAN_FLEXCAN if NET && CAN
> + select PPC_CLOCK if CAN_FLEXCAN
Can you move this to arch/powerpc/Kconfig & FSL_SOC instead.
> help
> This option enables support for the MPC85xx RDB (P1010 RDB) board
>
> --
> 1.7.2.1
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
