Taishan (440GX) has the first PHY (EMAC2) mapped at PHY address 1
and the 2nd PHY (EMAC3) at PHY address 3. Use "phy-address" to
correctly describe this instead of "phy-map".
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Josh Boyer <jwbo...@linux.vnet.ibm.com>
---
arch/powerpc/boot/dts/taishan.dts | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/taishan.dts
b/arch/powerpc/boot/dts/taishan.dts
index 058438f..1657ad0 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -337,7 +337,7 @@
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <0x00000001>;
+ phy-address = <1>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
@@ -361,7 +361,7 @@
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <0x00000003>;
+ phy-address = <3>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
zmii-device = <&ZMII0>;
--
1.7.6
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
