On Apr 19, 2011, at 11:12 PM, Prabhakar Kushwaha wrote: > PCIe device in legacy mode can trigger interrupts using the wires #INTA, #INTB > ,#INTC and #INTD. PCI devices are obligated to use #INTx for interrupts under > legacy mode. Each PCI slot or device is typically wired to different inputs > on > the interrupt controller. > > So, Define interrupt-map and interrupt-map-mask properties for device tree to > of map each PCI interrupt signal to the inputs of the interrupt controller. > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > --- > Based upon > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git(branch > master) > > This patch has depedency on following 2 patches > -- powerpc/85xx: P2020 DTS: re-organize dts files > -- powerpc/85xx: P1020 DTS : re-organize dts files > > arch/powerpc/boot/dts/p1020rdb.dts | 16 ++++++++++++++++ > arch/powerpc/boot/dts/p2020rdb.dts | 16 ++++++++++++++++ > arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 8 ++++++++ > arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 8 ++++++++ > 4 files changed, 48 insertions(+), 0 deletions(-)
applied to next - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
