If none of irq category bits were set mpc52xx_get_irq() would pass
NO_IRQ_IGNORE (-1) to irq_linear_revmap, which does an unsigned compare
and declares the interrupt above the linear map range. It then punts
to irq_find_mapping, which performs a linear search of all irqs,
which will likely miss and only then return NO_IRQ.
If no status bit is set, then we should return NO_IRQ directly.
The interrupt should not be suppressed from spurious counting, in fact
that is the definition of supurious.
Signed-off-by: Milton Miller <milt...@bga.com>
---
---
arch/powerpc/platforms/52xx/mpc52xx_pic.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index bb61181..1a9a495 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -486,7 +486,7 @@ void __init mpc52xx_init_irq(void)
unsigned int mpc52xx_get_irq(void)
{
u32 status;
- int irq = NO_IRQ_IGNORE;
+ int irq;
status = in_be32(&intr->enc_status);
if (status & 0x00000400) { /* critical */
@@ -509,6 +509,8 @@ unsigned int mpc52xx_get_irq(void)
} else {
irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET);
}
+ } else {
+ return NO_IRQ;
}
return irq_linear_revmap(mpc52xx_irqhost, irq);
--
1.7.0.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
