Add P1020 USB controller default value for "dr_mode" property
Signed-off-by: Ramneek Mehresh <[email protected]>
---
Applies on git://git.am.freescale.net/mirrors/linux-2.6.git
(branch master)
arch/powerpc/boot/dts/p1020rdb.dts | 10 ++++------
1 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts
b/arch/powerpc/boot/dts/p1020rdb.dts
index e0668f8..c630b51 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -473,13 +473,11 @@
interrupt-parent = <&mpic>;
interrupts = <28 0x2>;
phy_type = "ulpi";
+ dr_mode = "host";
};
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
+ /* USB2 is shared with localbus. It is used
+ only in case of SPI and SD boot*/
usb@23000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -488,8 +486,8 @@
interrupt-parent = <&mpic>;
interrupts = <46 0x2>;
phy_type = "ulpi";
+ dr_mode = "host";
};
- */
sdhci@2e000 {
compatible = "fsl,p1020-esdhc", "fsl,esdhc";
--
1.6.1
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev