From: Richard A Lary <rl...@linux.vnet.ibm.com>
For multifunction adapters with a PCI bridge or switch as the device
at the Partitionable Endpoint(PE), if one or more devices below PE
sets dev->needs_freset, that value will be set for the PE device.
In other words, if any device below PE requires a fundamental reset
the PE will request a fundamental reset.
Signed-off-by: Richard A Lary <rl...@linux.vnet.ibm.com>
---
arch/powerpc/platforms/pseries/eeh.c | 48 42 + 6 - 0 !
1 file changed, 42 insertions(+), 6 deletions(-)
Index: b/arch/powerpc/platforms/pseries/eeh.c
===================================================================
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -448,6 +448,39 @@ void eeh_clear_slot (struct device_node
raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
}
+void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
+{
+ struct device_node *dn;
+
+ for_each_child_of_node(parent, dn) {
+ if (PCI_DN(dn)) {
+
+ struct pci_dev *dev = PCI_DN(dn)->pcidev;
+
+ if (dev && dev->driver)
+ *freset |= dev->needs_freset;
+
+ __eeh_set_pe_freset(dn, freset);
+ }
+ }
+}
+
+void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
+{
+ struct pci_dev *dev;
+ dn = find_device_pe(dn);
+
+ /* Back up one, since config addrs might be shared */
+ if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ dn = dn->parent;
+
+ dev = PCI_DN(dn)->pcidev;
+ if (dev)
+ *freset |= dev->needs_freset;
+
+ __eeh_set_pe_freset(dn, freset);
+}
+
/**
* eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze
* @dn device node
@@ -736,18 +769,21 @@ int pcibios_set_pcie_reset_state(struct
/**
* rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
* @pdn: pci device node to be reset.
- *
- * Return 0 if success, else a non-zero value.
*/
static void __rtas_set_slot_reset(struct pci_dn *pdn)
{
- struct pci_dev *dev = pdn->pcidev;
+ unsigned int freset = 0;
- /* Determine type of EEH reset required by device,
- * default hot reset or fundamental reset
+ /* Determine type of EEH reset required for
+ * Partitionable Endpoint, a hot-reset (1)
+ * or a fundamental reset (3).
+ * A fundamental reset required by any device under
+ * Partitionable Endpoint trumps hot-reset.
*/
- if (dev && dev->needs_freset)
+ eeh_set_pe_freset(pdn->node, &freset);
+
+ if (freset)
rtas_pci_slot_reset(pdn, 3);
else
rtas_pci_slot_reset(pdn, 1);
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
