Hello. On 02-04-2011 1:56, tma...@apm.com wrote:
From: Tirumala Marri <tma...@apm.com>
Add Synopsys DesignWare HS USB OTG driver kernel configuration. Synopsys OTG driver may operate in host only, device only, or OTG mode. The driver also allows user configure the core to use its internal DMA or Slave (PIO) mode.
Signed-off-by: Tirumala R Marri <tma...@apm.com> Signed-off-by: Fushen Chen <fc...@apm.com> Signed-off-by: Mark Miesfeld <mmiesf...@apm.com>
[...]
diff --git a/drivers/usb/dwc/Kconfig b/drivers/usb/dwc/Kconfig new file mode 100644 index 0000000..a8f22cb --- /dev/null +++ b/drivers/usb/dwc/Kconfig @@ -0,0 +1,88 @@ +# +# USB Dual Role (OTG-ready) Controller Drivers +# for silicon based on Synopsys DesignWare IP +#
[...]
+# enable peripheral support (including with OTG) +config USB_GADGET_DWC_HDRC + bool + depends on USB_DWC_OTG&& (DWC_DEVICE_ONLY || USB_DWC_OTG) +
I've already told you not to redefine it. WBR, Sergei _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
