> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig > index bc5123c..61aca75 100644 > --- a/drivers/usb/gadget/Kconfig > +++ b/drivers/usb/gadget/Kconfig > @@ -365,6 +365,28 @@ config USB_GADGET_MUSB_HDRC > This OTG-capable silicon IP is used in dual designs including > the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin > > +# dwc_otg builds in ../dwc_otg along with host support > +config USB_GADGET_DWC_HDRC > + boolean "DesignWare USB Peripheral" > + depends on DWC_OTG_MODE || DWC_DEVICE_ONLY > + select USB_GADGET_DUALSPEED > + select USB_GADGET_SELECTED > + select USB_GADGET_DWC_OTG > + help > + This OTG-capable Designware USB IP
missing complete help text. > + > +config USB_GADGET_DWC_OTG > + boolean "OTG Support" > + depends on USB_GADGET_DWC_HDRC > + help > + The most notable feature of USB OTG is support for a > + "Dual-Role" device, which can act as either a device > + or a host. The initial role choice can be changed > + later, when two dual-role devices talk to each other. > + Select this only if your board has a Mini-AB connector. > + > + > + > config USB_GADGET_M66592 > boolean "Renesas M66592 USB Peripheral Controller" > select USB_GADGET_DUALSPEED --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
