Hi I am facing a problem with my powerpc gcc. Actually i am using a ltib to configure the kernel and the file system for my mpc8315erdb board from linux 2.6 host machine. and the installation of kernel and filesystem is successful. i don't have "make" installed in the board and i wanted to compile cgic library (an ANSI C library for cgi) for the board, hence i compiled it on the linux host machine itself but instead of using gcc i used powerpc-e300c3-linux-gnu-gcc which corresponds to the gcc of the mpc8315erdb board. however i get an error saying
powerpc-e300c3-linux-gnu-gcc: error trying to exec 'cc1': execvp: No such file or directory however powerpc-e300c3-linux-gnu-gcc is present in /usr/local/bin on the linux host machine and this directory is part of the path. so powerpc does exist on the host machine. if the error comes on the host linux then i would look for /usr/libexec/gcc/i486-slackware-linux/4.2.4/ but how do i rectify in this scenario. the makefile for the cgic was modified according to the powerpc architecture and i am attaching here below. Kindly help! plz! http://old.nabble.com/file/p31162979/Makefile Makefile -- View this message in context: http://old.nabble.com/Powerpc-gcc-error-for-mpc8315erdb-board-tp31162979p31162979.html Sent from the linuxppc-dev mailing list archive at Nabble.com. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
