When a single device error is detected, the device under the error is indicated
by the error bit set in the DER. There is a one to one mapping between register
bit and devices on Port multiplier(PMP) i.e. bit 0 represents PMP device 0 and
bit 1 represents PMP device 1 etc.
Current implementation treats Device error register value as device number not
set of bits representing multiple device on PMP. It is changed to consider bit
level.
No need to check for each set bit as all command is going to be aborted.
Signed-off-by: Ashish Kalra <b00...@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
---
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git (branch
master)
This patch is already gone through review of linuxppc-dev mail list.
Making CC linuxppc-dev@lists.ozlabs.org
Changes for v2: Incorporated Sergei Shtylyov's comment
- Put space after -
- added a line
Changes for v3: Incorporated David Laight's comment
- Condition check for dereg 0 for hardware error
drivers/ata/sata_fsl.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index b0214d0..ad84ddc 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1040,12 +1040,15 @@ static void sata_fsl_error_intr(struct ata_port *ap)
/* find out the offending link and qc */
if (ap->nr_pmp_links) {
+ unsigned int dev_num;
+
dereg = ioread32(hcr_base + DE);
iowrite32(dereg, hcr_base + DE);
iowrite32(cereg, hcr_base + CE);
- if (dereg < ap->nr_pmp_links) {
- link = &ap->pmp_link[dereg];
+ dev_num = ffs(dereg) - 1;
+ if (dev_num < ap->nr_pmp_links && dereg != 0) {
+ link = &ap->pmp_link[dev_num];
ehi = &link->eh_info;
qc = ata_qc_from_tag(ap, link->active_tag);
/*
--
1.7.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
