On Tue, 2011-01-18 at 20:37 -0800, Nishanth Aravamudan wrote:
> Is this what you were looking for?
>
> vio 30000000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
> table unavailable
> vio 30000000: Path: /vdevice/vty@30000000
> vio 4000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
> unavailable
> vio 4000: Path: /vdevice/IBM,sp@4000
> vio 4001: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
> unavailable
> vio 4001: Path: /vdevice/rtc@4001
> vio 4002: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
> unavailable
> vio 4002: Path: /vdevice/nvram@4002
> vio 4004: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
> unavailable
> vio 4004: Path: /vdevice/gscsi@4004
Ok, so they are all harmess (none of those device do DMA, appart maybe
gscsi, I have no idea what it is :-)
> FWIW, I looked at Anton's logs, and I don't think the boot failed, per
> se. I think it may have timed out (but not positive on that). I was able
> to boot 2.6.27-git17 on the exact same box, albeit it locks up at a
> later point (the sd abort I e-mailed about in a follow-up).
I haven't seen your email. I'll dig. Have to run now.
Cheers,
Ben.
>
>
> >
> > Cheers,
> > Ben.
> >
> > > After debugging a bit, this would appear to be due to the second hunk of
> > > b3c73856ae47d43d0d181f9de1c1c6c0820c4515.
> > >
> > > diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
> > > index b265405..1b695fd 100644
> > > --- a/arch/powerpc/kernel/vio.c
> > > +++ b/arch/powerpc/kernel/vio.c
> > > @@ -1257,6 +1257,10 @@ struct vio_dev *vio_register_device_node(struct
> > > device_node *of_node)
> > > viodev->dev.parent = &vio_bus_device.dev;
> > > viodev->dev.bus = &vio_bus_type;
> > > viodev->dev.release = vio_dev_release;
> > > + /* needed to ensure proper operation of coherent allocations
> > > + * later, in case driver doesn't set it explicitly */
> > > + dma_set_mask(&viodev->dev, DMA_BIT_MASK(64));
> > > + dma_set_coherent_mask(&viodev->dev, DMA_BIT_MASK(64));
> > >
> > > /* register with generic device framework */
> > > if (device_register(&viodev->dev)) {
> > >
> > > Milton, Sonny, any thoughts?
> > >
> > > Thanks,
> > > Nish
> > >
> >
> >
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
