Hi ! I am currently using a MPC8548 PowerPC board, and I have encountered the following problem : [ 19.867849] Unbalanced enable for IRQ 48 [ 19.867855] ------------[ cut here ]------------ [ 19.873819] Badness at /.../kernel/irq/manage.c:174 [ 19.873823] NIP: c0044acc LR: c0044acc CTR: c0018480 [ 19.873828] REGS: dfc2be60 TRAP: 0700 Tainted: P (2.6.24.7_www.men.de_1.1) [ 19.873831] MSR: 00021000 <ME> CR: 24000022 XER: 00000000 [ 19.873839] TASK = dfc204e0[5] 'events/0' THREAD: dfc2a000 [ 19.873842] GPR00: c0044acc dfc2bf10 dfc204e0 0000002f 00021000 00000000 00000000 00000000 [ 19.873854] GPR08: 00000034 ffffffff 0000574e de821b20 24000024 100607bc 00008000 00001020 [ 19.873865] GPR16: c0447b44 c0447b2c 00fff018 033327d2 00000008 c044b2c8 c048d1a8 c044b300 [ 19.873877] GPR24: dfc206a0 dfc204e0 dfc01f30 dfc2a000 00029000 c04cb714 00000030 c04cb6e4 [ 19.873890] NIP [c0044acc] enable_irq+0x6c/0xdc [ 19.873903] LR [c0044acc] enable_irq+0x6c/0xdc [ 19.873908] Call Trace: [ 19.873911] [dfc2bf10] [c0044acc] enable_irq+0x6c/0xdc (unreliable) [ 19.873919] [dfc2bf30] [c0217868] phy_change+0x74/0xe4 [ 19.873926] [dfc2bf50] [c002fb2c] run_workqueue+0xc4/0x15c [ 19.873933] [dfc2bf90] [c002ffb0] worker_thread+0x74/0xd4 [ 19.873940] [dfc2bfd0] [c0034360] kthread+0x48/0x84 [ 19.873946] [dfc2bff0] [c00047bc] kernel_thread+0x44/0x60 [ 19.873953] Instruction dump: [ 19.873957] 7fe04a14 3bbf0030 7fa3eb78 483a9461 813f001c 7c7c1b78 2f890000 409e0038 [ 19.873968] 3c60c045 7fc4f378 3863f1d4 4bfd9129 <0fe00000> 7fa3eb78 7f84e378 483a91a5
When looking at the phy_change function in drivers/net/phy/phy.c I have noticed something quite strange : We are calling phy_disable_interrupts() and after some operations, enable_irq(). The first thing I thought about is why aren't we calling disable_irq/enable_irq or phy_disable_interrupts/phy_enable_interrupts but a mix ? Next, I took a more deep look at phy_disable_interrupts() and sepcifically at the phy_config_interrupt() function : int err = 0; phydev->interrupts = interrupts; if (phydev->drv->config_intr) err = phydev->drv->config_intr(phydev); return err; If phydev->drv->config_intr is not implemented (this is my use case : I am using the drivers/net/gianfar.c driver), then, nothing will be done, and there is no disable_irq() call. I don't know what is better : using disable_irq/enable_irq or the phy specific functions, but I think that we should avoid using a mix... Am I wrong ? Thanks in advance, Regards, JM _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
