The new e5500 core is similar to the e500mc core but adds 64-bit
support. We support running it in 32-bit mode as it is identical to the
e500mc.
Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
---
* clean up kconfig further to reduce use of E500MC
arch/powerpc/include/asm/reg_booke.h | 2 +-
arch/powerpc/kernel/Makefile | 3 +++
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 15 +++++++++++++++
arch/powerpc/kernel/cputable.c | 28 ++++++++++++++++++++++++++--
arch/powerpc/kernel/traps.c | 7 ++++++-
arch/powerpc/platforms/85xx/Kconfig | 4 ++++
arch/powerpc/platforms/Kconfig.cputype | 9 +++++++--
7 files changed, 62 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/include/asm/reg_booke.h
b/arch/powerpc/include/asm/reg_booke.h
index 667a498..3a2eaba 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -203,7 +203,7 @@
#define PPC47x_MCSR_FPR 0x00800000 /* FPR parity error */
#define PPC47x_MCSR_IPR 0x00400000 /* Imprecise Machine Check Exception
*/
-#ifdef CONFIG_E500
+#if defined(CONFIG_E500) || defined(CONFIG_PPC_BOOK3E_64)
/* All e500 */
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 1dda701..5175d1e 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
paca.o nvram_64.o firmware.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
+obj-$(CONFIG_PPC_BOOK3E_64) += cpu_setup_fsl_booke.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC64) += vdso64/
@@ -55,7 +56,9 @@ obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
+ifeq ($(CONFIG_PPC32),y)
obj-$(CONFIG_E500) += idle_e500.o
+endif
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 0adb50a..894e64f 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -51,6 +51,7 @@ _GLOBAL(__e500_dcache_setup)
isync
blr
+#ifdef CONFIG_PPC32
_GLOBAL(__setup_cpu_e200)
/* enable dedicated debug exception handling resources (Debug APU) */
mfspr r3,SPRN_HID0
@@ -72,3 +73,17 @@ _GLOBAL(__setup_cpu_e500mc)
bl __setup_e500mc_ivors
mtlr r4
blr
+#endif
+/* Right now, restore and setup are the same thing */
+_GLOBAL(__restore_cpu_e5500)
+_GLOBAL(__setup_cpu_e5500)
+ mflr r4
+ bl __e500_icache_setup
+ bl __e500_dcache_setup
+#ifdef CONFIG_PPC_BOOK3E_64
+ bl .__setup_base_ivors
+#else
+ bl __setup_e500mc_ivors
+#endif
+ mtlr r4
+ blr
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 1f9123f..236aa73 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -66,6 +66,10 @@ extern void __restore_cpu_ppc970(void);
extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_power7(void);
#endif /* CONFIG_PPC64 */
+#if defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_E500)
+extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_e5500(void);
+#endif /* CONFIG_PPC_BOOK3E_64 || CONFIG_E500 */
/* This table only contains "desktop" CPUs, it need to be filled with embedded
* ones as well...
@@ -1891,7 +1895,28 @@ static struct cpu_spec __initdata cpu_specs[] = {
.platform = "ppc5554",
}
#endif /* CONFIG_E200 */
-#ifdef CONFIG_E500
+#endif /* CONFIG_PPC32 */
+#if defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_E500)
+ { /* e5500 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x80240000,
+ .cpu_name = "e5500",
+ .cpu_features = CPU_FTRS_E500MC,
+ .cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS
|
+ MMU_FTR_USE_TLBILX,
+ .icache_bsize = 64,
+ .dcache_bsize = 64,
+ .num_pmcs = 4,
+ .oprofile_cpu_type = "ppc/e500mc",
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
+ .cpu_setup = __setup_cpu_e5500,
+ .cpu_restore = __restore_cpu_e5500,
+ .machine_check = machine_check_e500mc,
+ .platform = "ppce5500",
+ },
+#endif
+#if defined(CONFIG_PPC32) & defined(CONFIG_E500)
{ /* e500 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x80200000,
@@ -1961,7 +1986,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
.platform = "powerpc",
}
#endif /* CONFIG_E500 */
-#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC_BOOK3E_64
{ /* This is a default entry to get going, to be replaced by
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index a45a63c..5e0985f 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -418,7 +418,7 @@ int machine_check_47x(struct pt_regs *regs)
return 0;
}
-#elif defined(CONFIG_E500)
+#elif defined(CONFIG_E500) || defined(CONFIG_PPC_BOOK3E_64)
int machine_check_e500mc(struct pt_regs *regs)
{
unsigned long mcsr = mfspr(SPRN_MCSR);
@@ -538,6 +538,11 @@ int machine_check_e500(struct pt_regs *regs)
return 0;
}
+
+int machine_check_generic(struct pt_regs *regs)
+{
+ return 0;
+}
#elif defined(CONFIG_E200)
int machine_check_e200(struct pt_regs *regs)
{
diff --git a/arch/powerpc/platforms/85xx/Kconfig
b/arch/powerpc/platforms/85xx/Kconfig
index 5bde1f2..ae25527 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -11,6 +11,8 @@ menuconfig FSL_SOC_BOOKE
if FSL_SOC_BOOKE
+if PPC32
+
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
@@ -177,6 +179,8 @@ config P4080_DS
help
This option enables support for the P4080 DS board
+endif # PPC32
+
endif # FSL_SOC_BOOKE
config TQM85xx
diff --git a/arch/powerpc/platforms/Kconfig.cputype
b/arch/powerpc/platforms/Kconfig.cputype
index d361f81..b946223 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -129,8 +129,8 @@ config E500
config PPC_E500MC
bool "e500mc Support"
- select PPC_FPU
depends on E500
+ select PPC_FPU
config PPC_FPU
bool
@@ -166,9 +166,14 @@ config BOOKE
config FSL_BOOKE
bool
- depends on E200 || E500
+ depends on (E200 || E500) && PPC32
default y
+# this is for common code between PPC32 & PPC64 FSL BOOKE
+config PPC_FSL_BOOK3E
+ bool
+ select FSL_EMB_PERFMON
+ default y if FSL_BOOKE
config PTE_64BIT
bool
--
1.7.2.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
