icswx is a PowerPC co-processor instruction to send data to a
co-processor. On Book-S processors the LPAR_ID and process ID (PID) of
the owning process are registered in the window context of the
co-processor at initial time. When the icswx instruction is executed,
the L2 generates a cop-reg transaction on PowerBus. The transaction has
no address and the processor does not perform an MMU access to
authenticate the transaction. The coprocessor compares the LPAR_ID and
the PID included in the transaction and the LPAR_ID and PID held in the
window context to determine if the process is authorized to generate the
transaction.
This patch adds icswx co-processor instruction support.
Signed-off-by: Sonny Rao <sonny...@linux.vnet.ibm.com>
Signed-off-by: Tseng-Hui (Frank) Lin <th...@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/mmu-hash64.h | 5 ++
arch/powerpc/include/asm/mmu_context.h | 6 ++
arch/powerpc/include/asm/reg.h | 12 ++++
arch/powerpc/include/asm/reg_booke.h | 3 -
arch/powerpc/mm/mmu_context_hash64.c | 105
++++++++++++++++++++++++++++++++
arch/powerpc/platforms/Kconfig.cputype | 16 +++++
6 files changed, 144 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/mmu-hash64.h
b/arch/powerpc/include/asm/mmu-hash64.h
index acac35d..6c1ab90 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -423,6 +423,11 @@ typedef struct {
#ifdef CONFIG_PPC_SUBPAGE_PROT
struct subpage_prot_table spt;
#endif /* CONFIG_PPC_SUBPAGE_PROT */
+#ifdef CONFIG_ICSWX
+ unsigned long acop; /* mask of enabled coprocessor types */
+#define HASH64_MAX_PID (0xFFFF)
+ unsigned int acop_pid; /* pid value used with coprocessors */
+#endif /* CONFIG_ICSWX */
} mm_context_t;
diff --git a/arch/powerpc/include/asm/mmu_context.h
b/arch/powerpc/include/asm/mmu_context.h
index 81fb412..88118de 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -80,6 +80,12 @@ static inline void switch_mm(struct mm_struct *prev,
struct mm_struct *next,
#define deactivate_mm(tsk,mm) do { } while (0)
+#ifdef CONFIG_ICSWX
+extern void switch_cop(struct mm_struct *next);
+extern int use_cop(unsigned long acop, struct mm_struct *mm);
+extern void drop_cop(unsigned long acop, struct mm_struct *mm);
+#endif /* CONFIG_ICSWX */
+
/*
* After we have set current->mm to a new value, this activates
* the context for the new mm so we see the new mappings.
diff --git a/arch/powerpc/include/asm/reg.h
b/arch/powerpc/include/asm/reg.h
index ff0005eec..9bbf178 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -170,8 +170,19 @@
#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control
*/
/* Special Purpose Registers (SPRNs)*/
+
+#ifdef CONFIG_40x
+#define SPRN_PID 0x3B1 /* Process ID */
+#else
+#define SPRN_PID 0x030 /* Process ID */
+#ifdef CONFIG_BOOKE
+#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
+#endif
+#endif
+
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DSCR 0x11
+#define SPRN_ACOP 0x1F /* Available Coprocessor Register */
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
#define CTRL_CT 0xc0000000 /* current thread */
@@ -879,6 +890,7 @@
#define PV_POWER5 0x003A
#define PV_POWER5p 0x003B
#define PV_970FX 0x003C
+#define PV_POWER7 0x003F
#define PV_630 0x0040
#define PV_630p 0x0041
#define PV_970MP 0x0044
diff --git a/arch/powerpc/include/asm/reg_booke.h
b/arch/powerpc/include/asm/reg_booke.h
index 667a498..5b0c781 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -150,8 +150,6 @@
* or IBM 40x.
*/
#ifdef CONFIG_BOOKE
-#define SPRN_PID 0x030 /* Process ID */
-#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */
#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */
#define SPRN_DEAR 0x03D /* Data Error Address Register */
@@ -168,7 +166,6 @@
#define SPRN_TCR 0x154 /* Timer Control Register */
#endif /* Book E */
#ifdef CONFIG_40x
-#define SPRN_PID 0x3B1 /* Process ID */
#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
diff --git a/arch/powerpc/mm/mmu_context_hash64.c
b/arch/powerpc/mm/mmu_context_hash64.c
index 2535828..8f432b6 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -18,6 +18,7 @@
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
+#include <linux/percpu.h>
#include <linux/module.h>
#include <linux/gfp.h>
@@ -26,6 +27,103 @@
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);
+#ifdef CONFIG_ICSWX
+static DEFINE_SPINLOCK(mmu_context_acop_lock);
+static DEFINE_IDA(cop_ida);
+
+/* Lazy switch the ACOP register */
+static DEFINE_PER_CPU(unsigned long, acop_reg);
+
+void switch_cop(struct mm_struct *next)
+{
+ if (!__is_processor(PV_POWER7))
+ return;
+
+ mtspr(SPRN_PID, next->context.acop_pid);
+ if (next->context.acop_pid &&
+ __get_cpu_var(acop_reg) != next->context.acop) {
+ mtspr(SPRN_ACOP, next->context.acop);
+ __get_cpu_var(acop_reg) = next->context.acop;
+ }
+}
+EXPORT_SYMBOL(switch_cop);
+
+int use_cop(unsigned long acop, struct mm_struct *mm)
+{
+ int acop_pid;
+ int err;
+
+ if (!__is_processor(PV_POWER7))
+ return -ENOSYS;
+
+ if (!mm)
+ return -EINVAL;
+
+ if (!mm->context.acop_pid) {
+ if (!ida_pre_get(&cop_ida, GFP_KERNEL))
+ return -ENOMEM;
+again:
+ spin_lock(&mmu_context_acop_lock);
+ err = ida_get_new_above(&cop_ida, 1, &acop_pid);
+ spin_unlock(&mmu_context_acop_lock);
+
+ if (err == -EAGAIN)
+ goto again;
+ else if (err)
+ return err;
+
+ if (acop_pid > HASH64_MAX_PID) {
+ spin_lock(&mmu_context_acop_lock);
+ ida_remove(&cop_ida, acop_pid);
+ spin_unlock(&mmu_context_acop_lock);
+ return -EBUSY;
+ }
+ mm->context.acop_pid = acop_pid;
+ if (mm == current->active_mm)
+ mtspr(SPRN_PID, mm->context.acop_pid);
+ }
+ spin_lock(&mmu_context_acop_lock);
+ mm->context.acop |= acop;
+ spin_unlock(&mmu_context_acop_lock);
+
+ get_cpu_var(acop_reg) = mm->context.acop;
+ if (mm == current->active_mm)
+ mtspr(SPRN_ACOP, mm->context.acop);
+ put_cpu_var(acop_reg);
+
+ return mm->context.acop_pid;
+}
+EXPORT_SYMBOL(use_cop);
+
+void drop_cop(unsigned long acop, struct mm_struct *mm)
+{
+ if (!__is_processor(PV_POWER7))
+ return;
+
+ if (WARN_ON(!mm))
+ return;
+
+ spin_lock(&mmu_context_acop_lock);
+ mm->context.acop &= ~acop;
+ spin_unlock(&mmu_context_acop_lock);
+ if (!mm->context.acop) {
+ spin_lock(&mmu_context_acop_lock);
+ ida_remove(&cop_ida, mm->context.acop_pid);
+ spin_unlock(&mmu_context_acop_lock);
+ mm->context.acop_pid = 0;
+ if (mm == current->active_mm)
+ mtspr(SPRN_PID, mm->context.acop_pid);
+ } else {
+ get_cpu_var(acop_reg) = mm->context.acop;
+ if (mm == current->active_mm)
+ mtspr(SPRN_ACOP, mm->context.acop);
+ put_cpu_var(acop_reg);
+ }
+ mmput(mm);
+}
+EXPORT_SYMBOL(drop_cop);
+#endif /* CONFIG_ICSWX */
+
/*
* The proto-VSID space has 2^35 - 1 segments available for user
mappings.
* Each segment contains 2^28 bytes. Each context maps 2^44 bytes,
@@ -93,6 +191,13 @@ EXPORT_SYMBOL_GPL(__destroy_context);
void destroy_context(struct mm_struct *mm)
{
+#ifdef CONFIG_ICSWX
+ if (mm->context.acop_pid) {
+ spin_lock(&mmu_context_acop_lock);
+ ida_remove(&cop_ida, mm->context.acop_pid);
+ spin_unlock(&mmu_context_acop_lock);
+ }
+#endif /* CONFIG_ICSWX */
__destroy_context(mm->context.id);
subpage_prot_free(mm);
mm->context.id = NO_CONTEXT;
diff --git a/arch/powerpc/platforms/Kconfig.cputype
b/arch/powerpc/platforms/Kconfig.cputype
index d361f81..9674703 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -220,6 +220,22 @@ config VSX
If in doubt, say Y here.
+config ICSWX
+ bool "Support for PowerPC icswx co-processor instruction"
+ depends on POWER4
+ default n
+ ---help---
+
+ Enabling this option to turn on the PowerPC icswx co-processor
+ instruction support for POWER7 processors.
+ This option is only useful if you have a processor that supports
+ icswx co-processor instruction. It does not have any affect on
+ processors without icswx co-processor instruction.
+
+ This support slightly increases kernel memory usage.
+
+ Say N if you do not have a POWER7 processor and a PowerPC
co-processor.
+
config SPE
bool "SPE Support"
depends on E200 || (E500 && !PPC_E500MC)
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
