The GPIO controller of MPC512x is slightly different from
8xxx GPIO controllers. The register interface is the same
except the external interrupt control register. The MPC512x
GPIO controller differentiates between four interrupt event
types and therefore provides two interrupt control registers,
GPICR1 and GPICR2. GPIO[0:15] interrupt event types are
configured in GPICR1 register, GPIO[16:31] - in GPICR2 register.
This patch adds MPC512x speciffic set_type() callback and
updates config file and comments. Additionally the gpio chip
registration function is changed to use for_each_matching_node()
preventing multiple registration if a node claimes compatibility
with another gpio controller type.
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
v2:
- add patch description
- use match table data to set irq set_type hook as
recommended
- refactor to use for_each_matching_node() in
mpc8xxx_add_gpiochips() as suggested by Grant
arch/powerpc/platforms/Kconfig | 7 ++-
arch/powerpc/sysdev/mpc8xxx_gpio.c | 72 ++++++++++++++++++++++++++++++++----
2 files changed, 68 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index d1663db..471115a 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -304,13 +304,14 @@ config OF_RTC
source "arch/powerpc/sysdev/bestcomm/Kconfig"
config MPC8xxx_GPIO
- bool "MPC8xxx GPIO support"
- depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE
|| PPC_86xx
+ bool "MPC512x/MPC8xxx GPIO support"
+ depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+ FSL_SOC_BOOKE || PPC_86xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Say Y here if you're going to use hardware that connects to the
- MPC831x/834x/837x/8572/8610 GPIOs.
+ MPC512x/831x/834x/837x/8572/8610 GPIOs.
config SIMPLE_GPIO
bool "Support for simple, memory-mapped GPIO controllers"
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c
b/arch/powerpc/sysdev/mpc8xxx_gpio.c
index 2b69084..87ad655 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -1,5 +1,5 @@
/*
- * GPIOs on MPC8349/8572/8610 and compatible
+ * GPIOs on MPC512x/8349/8572/8610 and compatible
*
* Copyright (C) 2008 Peter Korsgaard <jac...@sunsite.dk>
*
@@ -26,6 +26,7 @@
#define GPIO_IER 0x0c
#define GPIO_IMR 0x10
#define GPIO_ICR 0x14
+#define GPIO_ICR2 0x18
struct mpc8xxx_gpio_chip {
struct of_mm_gpio_chip mm_gc;
@@ -215,6 +216,51 @@ static int mpc8xxx_irq_set_type(unsigned int virq,
unsigned int flow_type)
return 0;
}
+static int mpc512x_irq_set_type(unsigned int virq, unsigned int flow_type)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
+ struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+ unsigned long gpio = virq_to_hw(virq);
+ void __iomem *reg;
+ unsigned int shift;
+ unsigned long flags;
+
+ if (gpio < 16) {
+ reg = mm->regs + GPIO_ICR;
+ shift = (15 - gpio) * 2;
+ } else {
+ reg = mm->regs + GPIO_ICR2;
+ shift = (15 - (gpio % 16)) * 2;
+ }
+
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_LEVEL_LOW:
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+ clrsetbits_be32(reg, 3 << shift, 2 << shift);
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_LEVEL_HIGH:
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+ clrsetbits_be32(reg, 3 << shift, 1 << shift);
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+ clrbits32(reg, 3 << shift);
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static struct irq_chip mpc8xxx_irq_chip = {
.name = "mpc8xxx-gpio",
.unmask = mpc8xxx_irq_unmask,
@@ -226,6 +272,9 @@ static struct irq_chip mpc8xxx_irq_chip = {
static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
+ if (h->of_node && h->of_node->data)
+ mpc8xxx_irq_chip.set_type = h->of_node->data;
+
set_irq_chip_data(virq, h->host_data);
set_irq_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
set_irq_type(virq, IRQ_TYPE_NONE);
@@ -317,18 +366,25 @@ err:
return;
}
+static struct of_device_id mpc8xxx_gpio_ids[] __initdata = {
+ { .compatible = "fsl,mpc8349-gpio", },
+ { .compatible = "fsl,mpc8572-gpio", },
+ { .compatible = "fsl,mpc8610-gpio", },
+ { .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, },
+ {}
+};
+
static int __init mpc8xxx_add_gpiochips(void)
{
+ const struct of_device_id *id;
struct device_node *np;
- for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio")
- mpc8xxx_add_controller(np);
-
- for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio")
- mpc8xxx_add_controller(np);
-
- for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio")
+ for_each_matching_node(np, mpc8xxx_gpio_ids) {
+ id = of_match_node(mpc8xxx_gpio_ids, np);
+ if (id)
+ np->data = id->data;
mpc8xxx_add_controller(np);
+ }
return 0;
}
--
1.7.0.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
