Signed-off-by: Mingkai Hu <mingkai...@freescale.com>
---
v2:
- Move the flash partition function from of_spi.c to MTD driver
drivers/mtd/devices/m25p80.c | 29 +++++++++++++++++++++++++++++
1 files changed, 29 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 81e49a9..5f00075 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -752,6 +752,31 @@ static const struct spi_device_id *__devinit
jedec_probe(struct spi_device *spi)
return NULL;
}
+/*
+ * parse_flash_partition - Parse the flash partition on the SPI bus
+ * @spi: Pointer to spi_device device
+ */
+void parse_flash_partition(struct spi_device *spi)
+{
+ struct mtd_partition *parts;
+ struct flash_platform_data *pdata;
+ int nr_parts = 0;
+ struct device_node *np = spi->dev.of_node;
+
+ nr_parts = of_mtd_parse_partitions(&spi->dev, np, &parts);
+ if (!nr_parts)
+ return;
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return;
+
+ pdata->parts = parts;
+ pdata->nr_parts = nr_parts;
+ spi->dev.platform_data = pdata;
+
+ return;
+}
/*
* board specific setup should have ensured the SPI clock used here
@@ -771,6 +796,10 @@ static int __devinit m25p_probe(struct spi_device *spi)
* a chip ID, try the JEDEC id commands; they'll work for most
* newer chips, even if we don't recognize the particular chip.
*/
+
+ /* Parse the flash partition */
+ parse_flash_partition(spi);
+
data = spi->dev.platform_data;
if (data && data->type) {
const struct spi_device_id *plat_id;
--
1.6.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
