The config options for REDWOOD_[56] were commented out in the powerpc
Kconfig. The ifdefs referencing this options therefore are dead and all
references to this can be removed (Also dependencies in other KConfig
files).
Signed-off-by: Christian Dietrich <qy03f...@stud.informatik.uni-erlangen.de>
---
arch/powerpc/platforms/40x/Kconfig | 16 -------------
drivers/mtd/maps/Kconfig | 2 +-
drivers/mtd/maps/redwood.c | 43 ------------------------------------
drivers/net/Kconfig | 2 +-
4 files changed, 2 insertions(+), 61 deletions(-)
diff --git a/arch/powerpc/platforms/40x/Kconfig
b/arch/powerpc/platforms/40x/Kconfig
index ec64264..b721764 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -71,22 +71,6 @@ config MAKALU
help
This option enables support for the AMCC PPC405EX board.
-#config REDWOOD_5
-# bool "Redwood-5"
-# depends on 40x
-# default n
-# select STB03xxx
-# help
-# This option enables support for the IBM STB04 evaluation board.
-
-#config REDWOOD_6
-# bool "Redwood-6"
-# depends on 40x
-# default n
-# select STB03xxx
-# help
-# This option enables support for the IBM STBx25xx evaluation board.
-
#config SYCAMORE
# bool "Sycamore"
# depends on 40x
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index f22bc9f..b5ebb72 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -321,7 +321,7 @@ config MTD_CFI_FLAGADM
config MTD_REDWOOD
tristate "CFI Flash devices mapped on IBM Redwood"
- depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+ depends on MTD_CFI && REDWOOD_4
help
This enables access routines for the flash chips on the IBM
Redwood board. If you have one of these boards and would like to
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 933c0b6..d2c9db0 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -22,8 +22,6 @@
#include <asm/io.h>
-#if !defined (CONFIG_REDWOOD_6)
-
#define WINDOW_ADDR 0xffc00000
#define WINDOW_SIZE 0x00400000
@@ -69,47 +67,6 @@ static struct mtd_partition redwood_flash_partitions[] = {
}
};
-#else /* CONFIG_REDWOOD_6 */
-/* FIXME: the window is bigger - armin */
-#define WINDOW_ADDR 0xff800000
-#define WINDOW_SIZE 0x00800000
-
-#define RW_PART0_OF 0
-#define RW_PART0_SZ 0x400000 /* 4 MiB data */
-#define RW_PART1_OF RW_PART0_OF + RW_PART0_SZ
-#define RW_PART1_SZ 0x10000 /* 64K VPD */
-#define RW_PART2_OF RW_PART1_OF + RW_PART1_SZ
-#define RW_PART2_SZ 0x400000 - (0x10000 + 0x20000)
-#define RW_PART3_OF RW_PART2_OF + RW_PART2_SZ
-#define RW_PART3_SZ 0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
- {
- .name = "Redwood filesystem",
- .offset = RW_PART0_OF,
- .size = RW_PART0_SZ
- },
- {
- .name = "Redwood OpenBIOS Vital Product Data",
- .offset = RW_PART1_OF,
- .size = RW_PART1_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "Redwood kernel",
- .offset = RW_PART2_OF,
- .size = RW_PART2_SZ
- },
- {
- .name = "Redwood OpenBIOS",
- .offset = RW_PART3_OF,
- .size = RW_PART3_SZ,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- }
-};
-
-#endif /* CONFIG_REDWOOD_6 */
-
struct map_info redwood_flash_map = {
.name = "IBM Redwood",
.size = WINDOW_SIZE,
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ce2fcdd..313d306 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -913,7 +913,7 @@ config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+ depends on ARM || M32R || SUPERH || \
MIPS || BLACKFIN || MN10300 || COLDFIRE
help
This is a driver for SMC's 91x series of Ethernet chipsets,
--
1.7.0.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
