On 06/30/2010 01:14 AM, Shawn Jin wrote:
Hi Scott,
Bus Fault @ 0x00404c40, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 07d1cb80 Unknown values in msr
NIP: 00404C40 XER: 00000000 LR: 00404C24 REGS: 07d1cb80 TRAP: 0200 DAR: 00000001
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
Can you look up the source line/instruction corresponding to 0x404c40, in
the wrapper ELF file?
I'm not sure how to look up it.
Use a powerpc gdb on the wrapper ELF file, and do "li *0x404c40" and/or
"i li *0x404c40".
Or use a powerpc addr2line.
But I used the BDI to dump the
instructions in which you may find some clue? These should be kernel
code, right? Maybe the gdb can help to de-assemble them?
Not easily (Format letter "i" is meaningless in "print" command, it
says...) and there'd be no context about what part of the source code it
corresponds to...
00404c40 : 0xa00a0000 -1609957376 ....
But this is a 16-bit load from r10, which is from your previous register
dump is FF0009C0.
Does u-boot on your board put IMMR somewhere other than 0xff000000? If
so, you'll need to update the device tree to reflect this.
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
