On 06/17/2010 11:56 AM, Gary Thomas wrote:
I'm working with 2.6.33.3 on a MPC8358. I'm trying to get it
to talk to a Marvell (DSA) switch which uses special drivers
and addressing to act like a PHY. I have this working fine
on some older (2.6.28) systems by using a fixed-link PHY
descriptor in my device tree (using the TSEC on 8347).
The GETH driver calls 'of_phy_connect_fixed_link' which
always gives me this error:
PHY 0:01 not found
net eth1: Could not attach to PHY
How can I get the GETH driver to just accept the pseudo
PHY connection specified by
fixed-link = <1 1 1000 0 0>;
Figured it out - my ethernet node in the device tree has
to be called 'ethernet' for the fixed PHY emulation to see
the fixed-link properties.
Seems rather limited, but I don't have time to change it.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
