On Wed, Mar 3, 2010 at 8:18 PM, Anton Vorontsov
<avoront...@ru.mvista.com> wrote:
> Starting with commit a3bc1f11e9b867a4f49505 ("gianfar: Revive SKB
> recycling") gianfar driver sooner or later stops transmitting any
> packets on SMP machines.
>
> start_xmit() prepares new skb for transmitting, generally it does
> three things:
>
> 1. sets up all BDs (marks them ready to send), except the first one.
> 2. stores skb into tx_queue->tx_skbuff so that clean_tx_ring()
> would cleanup it later.
> 3. sets up the first BD, i.e. marks it ready.
>
> Here is what clean_tx_ring() does:
>
> 1. reads skbs from tx_queue->tx_skbuff
> 2. checks if the *last* BD is ready. If it's still ready [to send]
> then it it isn't transmitted, so clean_tx_ring() returns.
> Otherwise it actually cleanups BDs. All is OK.
>
> Now, if there is just one BD, code flow:
>
> - start_xmit(): stores skb into tx_skbuff. Note that the first BD
> (which is also the last one) isn't marked as ready, yet.
> - clean_tx_ring(): sees that skb is not null, *and* its lstatus
> says that it is NOT ready (like if BD was sent), so it cleans
> it up (bad!)
> - start_xmit(): marks BD as ready [to send], but it's too late.
>
> We can fix this simply by reordering lstatus/tx_skbuff writes.
>
> Reported-by: Martyn Welch <martyn.we...@ge.com>
> Bisected-by: Paul Gortmaker <paul.gortma...@windriver.com>
> Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
> Tested-by: Paul Gortmaker <paul.gortma...@windriver.com>
> Tested-by: Martyn Welch <martyn.we...@ge.com>
> Cc: Sandeep Gopalpet <sandeep.ku...@freescale.com>
> Cc: Stable <sta...@vger.kernel.org> [2.6.33]
> ---
> drivers/net/gianfar.c | 5 ++++-
> 1 files changed, 4 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
> index 8bd3c9f..cccb409 100644
> --- a/drivers/net/gianfar.c
> +++ b/drivers/net/gianfar.c
> @@ -2021,7 +2021,6 @@ static int gfar_start_xmit(struct sk_buff *skb, struct
> net_device *dev)
> }
>
> /* setup the TxBD length and buffer pointer for the first BD */
> - tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
> txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
> skb_headlen(skb), DMA_TO_DEVICE);
>
> @@ -2053,6 +2052,10 @@ static int gfar_start_xmit(struct sk_buff *skb, struct
> net_device *dev)
>
> txbdp_start->lstatus = lstatus;
>
> + eieio(); /* force lstatus write before tx_skbuff */
> +
> + tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
> +
> /* Update the current skb pointer to the next entry we will use
> * (wrapping if necessary) */
> tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &
This patch also makes gianfar work stable on mpc8313 with 2.6.33/RT_PREEMPT.
WIthout it, I see exactly the same problems as reported by Anton on SMP.
/Esben
--
Esben Haabendal, Senior Software Consultant
DoréDevelopment ApS, Ved Stranden 1, 9560 Hadsund, DK-Denmark
Phone: +45 51 92 53 93, E-mail: e...@doredevelopment.dk
WWW: http://www.doredevelopment.dk
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
