Documentation/powerpc/mpc52xx.txt:5: ERROR: trailing whitespace Documentation/powerpc/mpc52xx.txt:13: ERROR: trailing whitespace Documentation/powerpc/mpc52xx.txt:18: ERROR: trailing whitespace Documentation/powerpc/mpc52xx.txt:24: ERROR: trailing whitespace Documentation/powerpc/mpc52xx.txt:25: ERROR: trailing whitespace Documentation/powerpc/mpc52xx.txt:29: ERROR: trailing whitespace
Signed-off-by: Andrea Gelmini <andrea.gelm...@gelma.net> --- Documentation/powerpc/mpc52xx.txt | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/powerpc/mpc52xx.txt b/Documentation/powerpc/mpc52xx.txt index 10dd4ab..0d540a3 100644 --- a/Documentation/powerpc/mpc52xx.txt +++ b/Documentation/powerpc/mpc52xx.txt @@ -2,7 +2,7 @@ Linux 2.6.x on MPC52xx family ----------------------------- For the latest info, go to http://www.246tNt.com/mpc52xx/ - + To compile/use : - U-Boot: @@ -10,23 +10,23 @@ To compile/use : if you wish to ). # make lite5200_defconfig # make uImage - + then, on U-boot: => tftpboot 200000 uImage => tftpboot 400000 pRamdisk => bootm 200000 400000 - + - DBug: # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION if you wish to ). # make lite5200_defconfig # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz - # make zImage.initrd - # make + # make zImage.initrd + # make then in DBug: DBug> dn -i zImage.initrd.lite5200 - + Some remarks : - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100 -- 1.7.1.251.gf80a2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
