On Wed, May 12, 2010 at 12:22:50PM +1000, Benjamin Herrenschmidt wrote: >The code to fixup the serial ports on 440SPe uses the incorrect >addresses for these. This fixes it. > >Signed-off-by: Benjamin Herrenschmidt <b...@kernel.crashing.org> >--- > >I'm surprised nobody noticed, serial is pretty busted for me without >that patch :-)
Odd. I don't have a 440SPe, so no surprise there but I would have thought someone would notice. Though this is only needed if you are using an older U-Boot that needs cuImage, and I'm guessing Stefan runs u-boot.git on his boards ;) > >diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c >index 27db893..627de25 100644 >--- a/arch/powerpc/boot/4xx.c >+++ b/arch/powerpc/boot/4xx.c >@@ -544,9 +544,9 @@ void ibm440spe_fixup_clocks(unsigned int sys_clk, > unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); > > /* serial clocks beed fixup based on int/ext */ You couldn't be bothered to fixup the typo? s/beed/need ;) I'll fix it when I bring this in. >- eplike_fixup_uart_clk(0, "/plb/opb/ser...@10000200", ser_clk, plb_clk); >- eplike_fixup_uart_clk(1, "/plb/opb/ser...@10000300", ser_clk, plb_clk); >- eplike_fixup_uart_clk(2, "/plb/opb/ser...@10000600", ser_clk, plb_clk); >+ eplike_fixup_uart_clk(0, "/plb/opb/ser...@f0000200", ser_clk, plb_clk); >+ eplike_fixup_uart_clk(1, "/plb/opb/ser...@f0000300", ser_clk, plb_clk); >+ eplike_fixup_uart_clk(2, "/plb/opb/ser...@f0000600", ser_clk, plb_clk); > } _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
