Hello Bill, On Friday 16 April 2010 04:51:38 Bill Gatliff wrote:
> Apparently, there are several similar modifications that need to be > made, ... I'm SW-Engineer, so I assume HW, that's always a good bet. ;) Please take care, that I forgot to tell you that my X server runs well on a Futjitsu 86295 chip, also connected to a MPC5200(B). I silently assumed that those two are identical in terms of byte ordering and (non) existant automatic byte swapping. At least, when you get a black screen when copying out nothing, you might be able to copy over some fixed pattern to find out what bits cause what, e.g. start writing 0x03 and shift that pattern left every 16 scanlines. In what mode is your X server running? 16/24/32 bit? DirectColor, etc? Roman -- Roman Fietze Telemotive AG Büro Mühlhausen Breitwiesen 73347 Mühlhausen Tel.: +49(0)7335/18493-45 http://www.telemotive.de _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev