Hi, after upgrading from 2.6.33 to today's latest mainline (daf9fe2...), I'm getting this during bootup on a powerpc machine (Powerbook G4):
[ 0.002187] ------------[ cut here ]------------ [ 0.002197] Badness at fs/proc/generic.c:316 [ 0.002207] NIP: c00e1130 LR: c00e1130 CTR: c01fb970 [ 0.002219] REGS: c044bdc0 TRAP: 0700 Not tainted (2.6.34-rc1) [ 0.002230] MSR: 00029032 <EE,ME,CE,IR,DR> CR: 22000022 XER: 20000000 [ 0.002255] TASK = c042c410[0] 'swapper' THREAD: c044a000 [ 0.002266] GPR00: c00e1130 c044be70 c042c410 00000024 000012ff ffffffff ffffffff 00000000 [ 0.002291] GPR08: ef808320 c04492d0 00000000 000012ff 42000028 00000000 00ca59bc 00ca56a8 [ 0.002315] GPR16: 00cc8420 00ca5998 00ca55b8 00ca569c 00240e18 00240e20 00ca5644 00240e24 [ 0.002340] GPR24: 00000000 0048b000 c044be98 c044bec8 c0d90a42 c0d90a42 00000006 00000000 [ 0.002376] NIP [c00e1130] __xlate_proc_name+0xd0/0xf8 [ 0.002389] LR [c00e1130] __xlate_proc_name+0xd0/0xf8 [ 0.002399] Call Trace: [ 0.002408] [c044be70] [c00e1130] __xlate_proc_name+0xd0/0xf8 (unreliable) [ 0.002426] [c044be90] [c00e16a4] __proc_create+0x60/0xf0 [ 0.002441] [c044bec0] [c00e1e0c] proc_create_data+0x54/0xc4 [ 0.002465] [c044bee0] [c00e5f8c] __proc_device_tree_add_prop+0x64/0xd4 [ 0.002486] [c044bf00] [c00e6130] proc_device_tree_add_node+0x134/0x164 [ 0.002506] [c044bf20] [c00e60b0] proc_device_tree_add_node+0xb4/0x164 [ 0.002527] [c044bf40] [c00e60b0] proc_device_tree_add_node+0xb4/0x164 [ 0.002548] [c044bf60] [c00e60b0] proc_device_tree_add_node+0xb4/0x164 [ 0.002568] [c044bf80] [c00e60b0] proc_device_tree_add_node+0xb4/0x164 [ 0.002592] [c044bfa0] [c0412c8c] proc_device_tree_init+0x4c/0x78 [ 0.002612] [c044bfb0] [c04126f4] proc_root_init+0xcc/0xf0 [ 0.002632] [c044bfc0] [c03ff798] start_kernel+0x230/0x284 [ 0.002649] [c044bff0] [00003444] 0x3444 [ 0.002662] Instruction dump: [ 0.002675] 93ba0000 38600000 93fb0000 80010024 bb410008 38210020 7c0803a6 4e800020 [ 0.002707] 3c60c03b 7f84e378 38631d54 48267a3d <0fe00000> 80010024 3860fffe bb410008 Is this something to worry about? The machine seems to run fine so far... Full dmesg and .config: http://nerdbynature.de/bits/2.6.34-rc1/xlate_proc_name/ Thanks, Christian. -- BOFH excuse #37: heavy gravity fluctuation, move computer to floor rapidly _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
