This avoids storing these registers in memory.
CPU6 errata will still use the old way.
Remove some G2 leftover accesses from 2.4
Signed-off-by: Joakim Tjernlund <joakim.tjernl...@transmode.se>
---
arch/powerpc/kernel/head_8xx.S | 49 +++++++++++++++++++++++++++++----------
1 files changed, 36 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 6478a96..1f1a04b 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -71,9 +71,6 @@ _ENTRY(_start);
* in the first level table, but that would require many changes to the
* Linux page directory/table functions that I don't want to do right now.
*
- * I used to use SPRG2 for a temporary register in the TLB handler, but it
- * has since been put to other uses. I now use a hack to save a register
- * and the CCR at memory location 0.....Someday I'll fix this.....
* -- Dan
*/
.globl __start
@@ -302,8 +299,13 @@ InstructionTLBMiss:
DO_8xx_CPU6(0x3f80, r3)
mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
mfcr r10
+#ifdef CONFIG_8xx_CPU6
stw r10, 0(r0)
stw r11, 4(r0)
+#else
+ mtspr SPRN_DAR, r10
+ mtspr SPRN_SPRG2, r11
+#endif
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
#ifdef CONFIG_8xx_CPU15
addi r11, r10, 0x1000
@@ -359,13 +361,19 @@ InstructionTLBMiss:
DO_8xx_CPU6(0x2d80, r3)
mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
- mfspr r10, SPRN_M_TW /* Restore registers */
+ /* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+ mfspr r10, SPRN_DAR
+ mtcr r10
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r11, SPRN_SPRG2
+#else
lwz r11, 0(r0)
mtcr r11
lwz r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
+ mfspr r10, SPRN_M_TW
rfi
2:
mfspr r11, SPRN_SRR1
@@ -375,13 +383,20 @@ InstructionTLBMiss:
rlwinm r11, r11, 0, 0xffff
mtspr SPRN_SRR1, r11
- mfspr r10, SPRN_M_TW /* Restore registers */
+ /* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+ mfspr r10, SPRN_DAR
+ mtcr r10
+ li r11, 0x00f0
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r11, SPRN_SPRG2
+#else
lwz r11, 0(r0)
mtcr r11
lwz r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
+ mfspr r10, SPRN_M_TW
b InstructionAccess
. = 0x1200
@@ -392,8 +407,13 @@ DataStoreTLBMiss:
DO_8xx_CPU6(0x3f80, r3)
mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
mfcr r10
+#ifdef CONFIG_8xx_CPU6
stw r10, 0(r0)
stw r11, 4(r0)
+#else
+ mtspr SPRN_DAR, r10
+ mtspr SPRN_SPRG2, r11
+#endif
mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
/* If we are faulting a kernel address, we have to use the
@@ -461,18 +481,24 @@ DataStoreTLBMiss:
* of the MMU.
*/
2: li r11, 0x00f0
- mtspr SPRN_DAR,r11 /* Tag DAR */
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
DO_8xx_CPU6(0x3d80, r3)
mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
- mfspr r10, SPRN_M_TW /* Restore registers */
+ /* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+ mfspr r10, SPRN_DAR
+ mtcr r10
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r11, SPRN_SPRG2
+#else
+ mtspr SPRN_DAR, r11 /* Tag DAR */
lwz r11, 0(r0)
mtcr r11
lwz r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
+ mfspr r10, SPRN_M_TW
rfi
/* This is an instruction TLB error on the MPC8xx. This could be due
@@ -684,9 +710,6 @@ start_here:
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
mtspr SPRN_SPRG_THREAD,r4
- li r3,0
- /* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
- mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */
/* stack */
lis r1,init_thread_un...@ha
--
1.6.4.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
