These patches attempt to provide support for the Freescale MPC512x
FEC in the fs_enet driver. The first cleanup patch replaces printk
by dev_xxx. The second and third attemt to support MPC5121 FEC
in the FEC driver.
Changes since previous version:
- don't attempt to provide runtime selection of
MPC5121 FEC support in the driver since it doesn't
make sense. Select MPC5121 FEC support at compile time.
- fix tx buffer alignment workaround patch to align
only misaligned buffers.
- address Eric's comments:
ratelimit warning message and
use 4-byte aligned skb->len for new properly
aligned skb.
The patches are based on net-next-2.6 and has been
tested on the:
- Freescale/STX "MPC5121ADS" board (board rev. 4) with
a MPC5121e Rev. 2.
- TQM860L and TQM855 boards.
Anatolij Gustschin (3):
fs_enet: use dev_xxx instead of printk
fs_enet: Add support for MPC512x to fs_enet driver
fs_enet: add FEC TX buffer alignment workaround for MPC5121
drivers/net/fs_enet/Kconfig | 10 +++-
drivers/net/fs_enet/fs_enet-main.c | 93 ++++++++++++++++++++++++++---------
drivers/net/fs_enet/fs_enet.h | 49 ++++++++++++++++++-
drivers/net/fs_enet/mac-fcc.c | 5 +-
drivers/net/fs_enet/mac-fec.c | 58 ++++++++++++++--------
drivers/net/fs_enet/mac-scc.c | 9 ++--
drivers/net/fs_enet/mii-fec.c | 4 +-
7 files changed, 169 insertions(+), 59 deletions(-)
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
