On Fri, Feb 5, 2010 at 6:42 AM, Anatolij Gustschin <ag...@denx.de> wrote:
> Adds NAND Flash Controller driver for MPC5121 Revision 2.
> All device features, except hardware ECC and power management,
> are supported.
>
> Signed-off-by: Piotr Ziecik <ko...@semihalf.com>
> Signed-off-by: Wolfgang Denk <w...@denx.de>
> Signed-off-by: Anatolij Gustschin <ag...@denx.de>
> Cc: <linux-...@lists.infradead.org>
> Cc: Grant Likely <grant.lik...@secretlab.ca>
> Cc: John Rigby <jcri...@gmail.com>
On *very* brief review...
Acked-by: Grant Likely <grant.lik...@secretlab.ca>
David, there are ordering issues on this patch with arch-specific
code. If the patch looks okay to you, then can I pick it up into my
tree?
Thanks,
g.
> ---
> Changes since v2:
> - move the arch bits into separate patch
> (it is the next patch in this series now)
> - use __devinit/__devexit/__devexit_p and __devinitdata
>
> Changes since v1:
> - add logfile with changes since previous version
>
> Changes since the patch version submitted in May 2009:
>
> - move mpc5121_nfc.h to the driver .c as there is only one user
> - remove DRV_VERSION macro
> - replace printk() by dev_*()
> - drop unnecessary .suspend and .resume initializations
> - remove duplicate .name/.owner settings
> - fix mpc5121_nfc_init() to "return
> of_register_platform_driver(&mpc5121_nfc_driver);"
> - move module_init() to just below the init function
> - remove MODULE_VERSION
> - use "mtd: Add MPC5121 NAND Flash Controller driver" as the subject,
> previously it was "mpc5121: Added NAND Flash Controller driver."
>
> drivers/mtd/nand/Kconfig | 7 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/mpc5121_nfc.c | 916
> ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 924 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mtd/nand/mpc5121_nfc.c
>
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 677cd53..099f002 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -442,6 +442,13 @@ config MTD_NAND_FSL_UPM
> Enables support for NAND Flash chips wired onto Freescale PowerPC
> processor localbus with User-Programmable Machine support.
>
> +config MTD_NAND_MPC5121_NFC
> + tristate "MPC5121 built-in NAND Flash Controller support"
> + depends on PPC_MPC512x
> + help
> + This enables the driver for the NAND flash controller on the
> + MPC5121 SoC.
> +
> config MTD_NAND_MXC
> tristate "MXC NAND support"
> depends on ARCH_MX2 || ARCH_MX3
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 1407bd1..d4ddf05 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -42,5 +42,6 @@ obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
> obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o
> obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o
> obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
> +obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
>
> nand-objs := nand_base.o nand_bbt.o
> diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
> new file mode 100644
> index 0000000..191bf99
> --- /dev/null
> +++ b/drivers/mtd/nand/mpc5121_nfc.c
> @@ -0,0 +1,916 @@
> +/*
> + * Copyright 2004-2008 Freescale Semiconductor, Inc.
> + * Copyright 2009 Semihalf.
> + *
> + * Approved as OSADL project by a majority of OSADL members and funded
> + * by OSADL membership fees in 2009; for details see www.osadl.org.
> + *
> + * Based on original driver from Freescale Semiconductor
> + * written by John Rigby <jri...@freescale.com> on basis
> + * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
> + * Piotr Ziecik <ko...@semihalf.com>.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/nand.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/mpc5xxx.h>
> +
> +/* Addresses for NFC MAIN RAM BUFFER areas */
> +#define NFC_MAIN_AREA(n) ((n) * 0x200)
> +
> +/* Addresses for NFC SPARE BUFFER areas */
> +#define NFC_SPARE_BUFFERS 8
> +#define NFC_SPARE_LEN 0x40
> +#define NFC_SPARE_AREA(n) (0x1000 + ((n) * NFC_SPARE_LEN))
> +
> +/* MPC5121 NFC registers */
> +#define NFC_BUF_ADDR 0x1E04
> +#define NFC_FLASH_ADDR 0x1E06
> +#define NFC_FLASH_CMD 0x1E08
> +#define NFC_CONFIG 0x1E0A
> +#define NFC_ECC_STATUS1 0x1E0C
> +#define NFC_ECC_STATUS2 0x1E0E
> +#define NFC_SPAS 0x1E10
> +#define NFC_WRPROT 0x1E12
> +#define NFC_NF_WRPRST 0x1E18
> +#define NFC_CONFIG1 0x1E1A
> +#define NFC_CONFIG2 0x1E1C
> +#define NFC_UNLOCKSTART_BLK0 0x1E20
> +#define NFC_UNLOCKEND_BLK0 0x1E22
> +#define NFC_UNLOCKSTART_BLK1 0x1E24
> +#define NFC_UNLOCKEND_BLK1 0x1E26
> +#define NFC_UNLOCKSTART_BLK2 0x1E28
> +#define NFC_UNLOCKEND_BLK2 0x1E2A
> +#define NFC_UNLOCKSTART_BLK3 0x1E2C
> +#define NFC_UNLOCKEND_BLK3 0x1E2E
> +
> +/* Bit Definitions: NFC_BUF_ADDR */
> +#define NFC_RBA_MASK (7 << 0)
> +#define NFC_ACTIVE_CS_SHIFT 5
> +#define NFC_ACTIVE_CS_MASK (3 << NFC_ACTIVE_CS_SHIFT)
> +
> +/* Bit Definitions: NFC_CONFIG */
> +#define NFC_BLS_UNLOCKED (1 << 1)
> +
> +/* Bit Definitions: NFC_CONFIG1 */
> +#define NFC_ECC_4BIT (1 << 0)
> +#define NFC_FULL_PAGE_DMA (1 << 1)
> +#define NFC_SPARE_ONLY (1 << 2)
> +#define NFC_ECC_ENABLE (1 << 3)
> +#define NFC_INT_MASK (1 << 4)
> +#define NFC_BIG_ENDIAN (1 << 5)
> +#define NFC_RESET (1 << 6)
> +#define NFC_CE (1 << 7)
> +#define NFC_ONE_CYCLE (1 << 8)
> +#define NFC_PPB_32 (0 << 9)
> +#define NFC_PPB_64 (1 << 9)
> +#define NFC_PPB_128 (2 << 9)
> +#define NFC_PPB_256 (3 << 9)
> +#define NFC_PPB_MASK (3 << 9)
> +#define NFC_FULL_PAGE_INT (1 << 11)
> +
> +/* Bit Definitions: NFC_CONFIG2 */
> +#define NFC_COMMAND (1 << 0)
> +#define NFC_ADDRESS (1 << 1)
> +#define NFC_INPUT (1 << 2)
> +#define NFC_OUTPUT (1 << 3)
> +#define NFC_ID (1 << 4)
> +#define NFC_STATUS (1 << 5)
> +#define NFC_CMD_FAIL (1 << 15)
> +#define NFC_INT (1 << 15)
> +
> +/* Bit Definitions: NFC_WRPROT */
> +#define NFC_WPC_LOCK_TIGHT (1 << 0)
> +#define NFC_WPC_LOCK (1 << 1)
> +#define NFC_WPC_UNLOCK (1 << 2)
> +
> +#define DRV_NAME "mpc5121_nfc"
> +
> +/* Timeouts */
> +#define NFC_RESET_TIMEOUT 1000 /* 1 ms */
> +#define NFC_TIMEOUT (HZ / 10) /* 1/10 s */
> +
> +struct mpc5121_nfc_prv {
> + struct mtd_info mtd;
> + struct nand_chip chip;
> + int irq;
> + void __iomem *regs;
> + struct clk *clk;
> + wait_queue_head_t irq_waitq;
> + uint column;
> + int spareonly;
> + void __iomem *csreg;
> + struct device *dev;
> +};
> +
> +static void mpc5121_nfc_done(struct mtd_info *mtd);
> +
> +#ifdef CONFIG_MTD_PARTITIONS
> +static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL };
> +#endif
> +
> +/* Read NFC register */
> +static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> +
> + return in_be16(prv->regs + reg);
> +}
> +
> +/* Write NFC register */
> +static inline void nfc_write(struct mtd_info *mtd, uint reg, u16 val)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> +
> + out_be16(prv->regs + reg, val);
> +}
> +
> +/* Set bits in NFC register */
> +static inline void nfc_set(struct mtd_info *mtd, uint reg, u16 bits)
> +{
> + nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
> +}
> +
> +/* Clear bits in NFC register */
> +static inline void nfc_clear(struct mtd_info *mtd, uint reg, u16 bits)
> +{
> + nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
> +}
> +
> +/* Invoke address cycle */
> +static inline void mpc5121_nfc_send_addr(struct mtd_info *mtd, u16 addr)
> +{
> + nfc_write(mtd, NFC_FLASH_ADDR, addr);
> + nfc_write(mtd, NFC_CONFIG2, NFC_ADDRESS);
> + mpc5121_nfc_done(mtd);
> +}
> +
> +/* Invoke command cycle */
> +static inline void mpc5121_nfc_send_cmd(struct mtd_info *mtd, u16 cmd)
> +{
> + nfc_write(mtd, NFC_FLASH_CMD, cmd);
> + nfc_write(mtd, NFC_CONFIG2, NFC_COMMAND);
> + mpc5121_nfc_done(mtd);
> +}
> +
> +/* Send data from NFC buffers to NAND flash */
> +static inline void mpc5121_nfc_send_prog_page(struct mtd_info *mtd)
> +{
> + nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
> + nfc_write(mtd, NFC_CONFIG2, NFC_INPUT);
> + mpc5121_nfc_done(mtd);
> +}
> +
> +/* Receive data from NAND flash */
> +static inline void mpc5121_nfc_send_read_page(struct mtd_info *mtd)
> +{
> + nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
> + nfc_write(mtd, NFC_CONFIG2, NFC_OUTPUT);
> + mpc5121_nfc_done(mtd);
> +}
> +
> +/* Receive ID from NAND flash */
> +static inline void mpc5121_nfc_send_read_id(struct mtd_info *mtd)
> +{
> + nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
> + nfc_write(mtd, NFC_CONFIG2, NFC_ID);
> + mpc5121_nfc_done(mtd);
> +}
> +
> +/* Receive status from NAND flash */
> +static inline void mpc5121_nfc_send_read_status(struct mtd_info *mtd)
> +{
> + nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
> + nfc_write(mtd, NFC_CONFIG2, NFC_STATUS);
> + mpc5121_nfc_done(mtd);
> +}
> +
> +/* NFC interrupt handler */
> +static irqreturn_t mpc5121_nfc_irq(int irq, void *data)
> +{
> + struct mtd_info *mtd = data;
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> +
> + nfc_set(mtd, NFC_CONFIG1, NFC_INT_MASK);
> + wake_up(&prv->irq_waitq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +/* Wait for operation complete */
> +static void mpc5121_nfc_done(struct mtd_info *mtd)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> + int rv;
> +
> + if ((nfc_read(mtd, NFC_CONFIG2) & NFC_INT) == 0) {
> + nfc_clear(mtd, NFC_CONFIG1, NFC_INT_MASK);
> + rv = wait_event_timeout(prv->irq_waitq,
> + (nfc_read(mtd, NFC_CONFIG2) & NFC_INT), NFC_TIMEOUT);
> +
> + if (!rv)
> + dev_warn(prv->dev,
> + "Timeout while waiting for interrupt.\n");
> + }
> +
> + nfc_clear(mtd, NFC_CONFIG2, NFC_INT);
> +}
> +
> +/* Do address cycle(s) */
> +static void mpc5121_nfc_addr_cycle(struct mtd_info *mtd, int column, int
> page)
> +{
> + struct nand_chip *chip = mtd->priv;
> + u32 pagemask = chip->pagemask;
> +
> + if (column != -1) {
> + mpc5121_nfc_send_addr(mtd, column);
> + if (mtd->writesize > 512)
> + mpc5121_nfc_send_addr(mtd, column >> 8);
> + }
> +
> + if (page != -1) {
> + do {
> + mpc5121_nfc_send_addr(mtd, page & 0xFF);
> + page >>= 8;
> + pagemask >>= 8;
> + } while (pagemask);
> + }
> +}
> +
> +/* Control chip select signals */
> +static void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
> +{
> + if (chip < 0) {
> + nfc_clear(mtd, NFC_CONFIG1, NFC_CE);
> + return;
> + }
> +
> + nfc_clear(mtd, NFC_BUF_ADDR, NFC_ACTIVE_CS_MASK);
> + nfc_set(mtd, NFC_BUF_ADDR, (chip << NFC_ACTIVE_CS_SHIFT) &
> + NFC_ACTIVE_CS_MASK);
> + nfc_set(mtd, NFC_CONFIG1, NFC_CE);
> +}
> +
> +/* Init external chip select logic on ADS5121 board */
> +static int ads5121_chipselect_init(struct mtd_info *mtd)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> + struct device_node *dn;
> +
> + dn = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld");
> + if (dn) {
> + prv->csreg = of_iomap(dn, 0);
> + of_node_put(dn);
> + if (!prv->csreg)
> + return -ENOMEM;
> +
> + /* CPLD Register 9 controls NAND /CE Lines */
> + prv->csreg += 9;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +/* Control chips select signal on ADS5121 board */
> +static void ads5121_select_chip(struct mtd_info *mtd, int chip)
> +{
> + struct nand_chip *nand = mtd->priv;
> + struct mpc5121_nfc_prv *prv = nand->priv;
> + u8 v;
> +
> + v = in_8(prv->csreg);
> + v |= 0x0F;
> +
> + if (chip >= 0) {
> + mpc5121_nfc_select_chip(mtd, 0);
> + v &= ~(1 << chip);
> + } else
> + mpc5121_nfc_select_chip(mtd, -1);
> +
> + out_8(prv->csreg, v);
> +}
> +
> +/* Read NAND Ready/Busy signal */
> +static int mpc5121_nfc_dev_ready(struct mtd_info *mtd)
> +{
> + /*
> + * NFC handles ready/busy signal internally. Therefore, this function
> + * always returns status as ready.
> + */
> + return 1;
> +}
> +
> +/* Write command to NAND flash */
> +static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command,
> + int column, int page)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> +
> + prv->column = (column >= 0) ? column : 0;
> + prv->spareonly = 0;
> +
> + switch (command) {
> + case NAND_CMD_PAGEPROG:
> + mpc5121_nfc_send_prog_page(mtd);
> + break;
> + /*
> + * NFC does not support sub-page reads and writes,
> + * so emulate them using full page transfers.
> + */
> + case NAND_CMD_READ0:
> + column = 0;
> + break;
> +
> + case NAND_CMD_READ1:
> + prv->column += 256;
> + command = NAND_CMD_READ0;
> + column = 0;
> + break;
> +
> + case NAND_CMD_READOOB:
> + prv->spareonly = 1;
> + command = NAND_CMD_READ0;
> + column = 0;
> + break;
> +
> + case NAND_CMD_SEQIN:
> + mpc5121_nfc_command(mtd, NAND_CMD_READ0, column, page);
> + column = 0;
> + break;
> +
> + case NAND_CMD_ERASE1:
> + case NAND_CMD_ERASE2:
> + case NAND_CMD_READID:
> + case NAND_CMD_STATUS:
> + break;
> +
> + default:
> + return;
> + }
> +
> + mpc5121_nfc_send_cmd(mtd, command);
> + mpc5121_nfc_addr_cycle(mtd, column, page);
> +
> + switch (command) {
> + case NAND_CMD_READ0:
> + if (mtd->writesize > 512)
> + mpc5121_nfc_send_cmd(mtd, NAND_CMD_READSTART);
> + mpc5121_nfc_send_read_page(mtd);
> + break;
> +
> + case NAND_CMD_READID:
> + mpc5121_nfc_send_read_id(mtd);
> + break;
> +
> + case NAND_CMD_STATUS:
> + mpc5121_nfc_send_read_status(mtd);
> + if (chip->options & NAND_BUSWIDTH_16)
> + prv->column = 1;
> + else
> + prv->column = 0;
> + break;
> + }
> +}
> +
> +/* Copy data from/to NFC spare buffers. */
> +static void mpc5121_nfc_copy_spare(struct mtd_info *mtd, uint offset,
> + u8 *buffer, uint size, int wr)
> +{
> + struct nand_chip *nand = mtd->priv;
> + struct mpc5121_nfc_prv *prv = nand->priv;
> + uint o, s, sbsize, blksize;
> +
> + /*
> + * NAND spare area is available through NFC spare buffers.
> + * The NFC divides spare area into (page_size / 512) chunks.
> + * Each chunk is placed into separate spare memory area, using
> + * first (spare_size / num_of_chunks) bytes of the buffer.
> + *
> + * For NAND device in which the spare area is not divided fully
> + * by the number of chunks, number of used bytes in each spare
> + * buffer is rounded down to the nearest even number of bytes,
> + * and all remaining bytes are added to the last used spare area.
> + *
> + * For more information read section 26.6.10 of MPC5121e
> + * Microcontroller Reference Manual, Rev. 3.
> + */
> +
> + /* Calculate number of valid bytes in each spare buffer */
> + sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1;
> +
> + while (size) {
> + /* Calculate spare buffer number */
> + s = offset / sbsize;
> + if (s > NFC_SPARE_BUFFERS - 1)
> + s = NFC_SPARE_BUFFERS - 1;
> +
> + /*
> + * Calculate offset to requested data block in selected spare
> + * buffer and its size.
> + */
> + o = offset - (s * sbsize);
> + blksize = min(sbsize - o, size);
> +
> + if (wr)
> + memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o,
> + buffer, blksize);
> + else
> + memcpy_fromio(buffer,
> + prv->regs + NFC_SPARE_AREA(s) + o, blksize);
> +
> + buffer += blksize;
> + offset += blksize;
> + size -= blksize;
> + };
> +}
> +
> +/* Copy data from/to NFC main and spare buffers */
> +static void mpc5121_nfc_buf_copy(struct mtd_info *mtd, u_char *buf, int len,
> + int
> wr)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> + uint c = prv->column;
> + uint l;
> +
> + /* Handle spare area access */
> + if (prv->spareonly || c >= mtd->writesize) {
> + /* Calculate offset from beginning of spare area */
> + if (c >= mtd->writesize)
> + c -= mtd->writesize;
> +
> + prv->column += len;
> + mpc5121_nfc_copy_spare(mtd, c, buf, len, wr);
> + return;
> + }
> +
> + /*
> + * Handle main area access - limit copy length to prevent
> + * crossing main/spare boundary.
> + */
> + l = min((uint)len, mtd->writesize - c);
> + prv->column += l;
> +
> + if (wr)
> + memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l);
> + else
> + memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l);
> +
> + /* Handle crossing main/spare boundary */
> + if (l != len) {
> + buf += l;
> + len -= l;
> + mpc5121_nfc_buf_copy(mtd, buf, len, wr);
> + }
> +}
> +
> +/* Read data from NFC buffers */
> +static void mpc5121_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
> +{
> + mpc5121_nfc_buf_copy(mtd, buf, len, 0);
> +}
> +
> +/* Write data to NFC buffers */
> +static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
> + const u_char *buf, int len)
> +{
> + mpc5121_nfc_buf_copy(mtd, (u_char *)buf, len, 1);
> +}
> +
> +/* Compare buffer with NAND flash */
> +static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
> + const u_char *buf, int len)
> +{
> + u_char tmp[256];
> + uint bsize;
> +
> + while (len) {
> + bsize = min(len, 256);
> + mpc5121_nfc_read_buf(mtd, tmp, bsize);
> +
> + if (memcmp(buf, tmp, bsize))
> + return 1;
> +
> + buf += bsize;
> + len -= bsize;
> + }
> +
> + return 0;
> +}
> +
> +/* Read byte from NFC buffers */
> +static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
> +{
> + u8 tmp;
> +
> + mpc5121_nfc_read_buf(mtd, &tmp, sizeof(tmp));
> +
> + return tmp;
> +}
> +
> +/* Read word from NFC buffers */
> +static u16 mpc5121_nfc_read_word(struct mtd_info *mtd)
> +{
> + u16 tmp;
> +
> + mpc5121_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
> +
> + return tmp;
> +}
> +
> +/*
> + * Read NFC configuration from Reset Config Word
> + *
> + * NFC is configured during reset in basis of information stored
> + * in Reset Config Word. There is no other way to set NAND block
> + * size, spare size and bus width.
> + */
> +static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> + struct mpc512x_reset_module *rm;
> + struct device_node *rmnode;
> + uint rcw_pagesize = 0;
> + uint rcw_sparesize = 0;
> + uint rcw_width;
> + uint rcwh;
> + uint romloc, ps;
> +
> + rmnode = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
> + if (!rmnode) {
> + dev_err(prv->dev, "Missing 'fsl,mpc5121-reset' "
> + "node in device tree!\n");
> + return -ENODEV;
> + }
> +
> + rm = of_iomap(rmnode, 0);
> + if (!rm) {
> + dev_err(prv->dev, "Error mapping reset module node!\n");
> + return -EBUSY;
> + }
> +
> + rcwh = in_be32(&rm->rcwhr);
> +
> + /* Bit 6: NFC bus width */
> + rcw_width = ((rcwh >> 6) & 0x1) ? 2 : 1;
> +
> + /* Bit 7: NFC Page/Spare size */
> + ps = (rcwh >> 7) & 0x1;
> +
> + /* Bits [22:21]: ROM Location */
> + romloc = (rcwh >> 21) & 0x3;
> +
> + /* Decode RCW bits */
> + switch ((ps << 2) | romloc) {
> + case 0x00:
> + case 0x01:
> + rcw_pagesize = 512;
> + rcw_sparesize = 16;
> + break;
> + case 0x02:
> + case 0x03:
> + rcw_pagesize = 4096;
> + rcw_sparesize = 128;
> + break;
> + case 0x04:
> + case 0x05:
> + rcw_pagesize = 2048;
> + rcw_sparesize = 64;
> + break;
> + case 0x06:
> + case 0x07:
> + rcw_pagesize = 4096;
> + rcw_sparesize = 218;
> + break;
> + }
> +
> + mtd->writesize = rcw_pagesize;
> + mtd->oobsize = rcw_sparesize;
> + if (rcw_width == 2)
> + chip->options |= NAND_BUSWIDTH_16;
> +
> + dev_notice(prv->dev, "Configured for "
> + "%u-bit NAND, page size %u "
> + "with %u spare.\n",
> + rcw_width * 8, rcw_pagesize,
> + rcw_sparesize);
> + iounmap(rm);
> + of_node_put(rmnode);
> + return 0;
> +}
> +
> +/* Free driver resources */
> +static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> +
> + if (prv->clk) {
> + clk_disable(prv->clk);
> + clk_put(prv->clk);
> + }
> +
> + if (prv->csreg)
> + iounmap(prv->csreg);
> +}
> +
> +static int __devinit mpc5121_nfc_probe(struct of_device *op,
> + const struct of_device_id *match)
> +{
> + struct device_node *rootnode, *dn = op->node;
> + struct device *dev = &op->dev;
> + struct mpc5121_nfc_prv *prv;
> + struct resource res;
> + struct mtd_info *mtd;
> +#ifdef CONFIG_MTD_PARTITIONS
> + struct mtd_partition *parts;
> +#endif
> + struct nand_chip *chip;
> + unsigned long regs_paddr, regs_size;
> + const uint *chips_no;
> + int resettime = 0;
> + int retval = 0;
> + int rev, len;
> +
> + /*
> + * Check SoC revision. This driver supports only NFC
> + * in MPC5121 revision 2.
> + */
> + rev = (mfspr(SPRN_SVR) >> 4) & 0xF;
> + if (rev != 2) {
> + dev_err(dev, "SoC revision %u is not supported!\n", rev);
> + return -ENXIO;
> + }
> +
> + prv = devm_kzalloc(dev, sizeof(*prv), GFP_KERNEL);
> + if (!prv) {
> + dev_err(dev, "Memory exhausted!\n");
> + return -ENOMEM;
> + }
> +
> + mtd = &prv->mtd;
> + chip = &prv->chip;
> +
> + mtd->priv = chip;
> + chip->priv = prv;
> + prv->dev = dev;
> +
> + /* Read NFC configuration from Reset Config Word */
> + retval = mpc5121_nfc_read_hw_config(mtd);
> + if (retval) {
> + dev_err(dev, "Unable to read NFC config!\n");
> + return retval;
> + }
> +
> + prv->irq = irq_of_parse_and_map(dn, 0);
> + if (prv->irq == NO_IRQ) {
> + dev_err(dev, "Error mapping IRQ!\n");
> + return -EINVAL;
> + }
> +
> + retval = of_address_to_resource(dn, 0, &res);
> + if (retval) {
> + dev_err(dev, "Error parsing memory region!\n");
> + return retval;
> + }
> +
> + chips_no = of_get_property(dn, "chips", &len);
> + if (!chips_no || len != sizeof(*chips_no)) {
> + dev_err(dev, "Invalid/missing 'chips' property!\n");
> + return -EINVAL;
> + }
> +
> + regs_paddr = res.start;
> + regs_size = res.end - res.start + 1;
> +
> + if (!devm_request_mem_region(dev, regs_paddr, regs_size, DRV_NAME)) {
> + dev_err(dev, "Error requesting memory region!\n");
> + return -EBUSY;
> + }
> +
> + prv->regs = devm_ioremap(dev, regs_paddr, regs_size);
> + if (!prv->regs) {
> + dev_err(dev, "Error mapping memory region!\n");
> + return -ENOMEM;
> + }
> +
> + mtd->name = "MPC5121 NAND";
> + chip->dev_ready = mpc5121_nfc_dev_ready;
> + chip->cmdfunc = mpc5121_nfc_command;
> + chip->read_byte = mpc5121_nfc_read_byte;
> + chip->read_word = mpc5121_nfc_read_word;
> + chip->read_buf = mpc5121_nfc_read_buf;
> + chip->write_buf = mpc5121_nfc_write_buf;
> + chip->verify_buf = mpc5121_nfc_verify_buf;
> + chip->select_chip = mpc5121_nfc_select_chip;
> + chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
> + chip->ecc.mode = NAND_ECC_SOFT;
> +
> + /* Support external chip-select logic on ADS5121 board */
> + rootnode = of_find_node_by_path("/");
> + if (of_device_is_compatible(rootnode, "fsl,mpc5121ads")) {
> + retval = ads5121_chipselect_init(mtd);
> + if (retval) {
> + dev_err(dev, "Chipselect init error!\n");
> + of_node_put(rootnode);
> + return retval;
> + }
> +
> + chip->select_chip = ads5121_select_chip;
> + }
> + of_node_put(rootnode);
> +
> + /* Enable NFC clock */
> + prv->clk = clk_get(dev, "nfc_clk");
> + if (!prv->clk) {
> + dev_err(dev, "Unable to acquire NFC clock!\n");
> + retval = -ENODEV;
> + goto error;
> + }
> +
> + clk_enable(prv->clk);
> +
> + /* Reset NAND Flash controller */
> + nfc_set(mtd, NFC_CONFIG1, NFC_RESET);
> + while (nfc_read(mtd, NFC_CONFIG1) & NFC_RESET) {
> + if (resettime++ >= NFC_RESET_TIMEOUT) {
> + dev_err(dev, "Timeout while resetting NFC!\n");
> + retval = -EINVAL;
> + goto error;
> + }
> +
> + udelay(1);
> + }
> +
> + /* Enable write to NFC memory */
> + nfc_write(mtd, NFC_CONFIG, NFC_BLS_UNLOCKED);
> +
> + /* Enable write to all NAND pages */
> + nfc_write(mtd, NFC_UNLOCKSTART_BLK0, 0x0000);
> + nfc_write(mtd, NFC_UNLOCKEND_BLK0, 0xFFFF);
> + nfc_write(mtd, NFC_WRPROT, NFC_WPC_UNLOCK);
> +
> + /*
> + * Setup NFC:
> + * - Big Endian transfers,
> + * - Interrupt after full page read/write.
> + */
> + nfc_write(mtd, NFC_CONFIG1, NFC_BIG_ENDIAN | NFC_INT_MASK |
> + NFC_FULL_PAGE_INT);
> +
> + /* Set spare area size */
> + nfc_write(mtd, NFC_SPAS, mtd->oobsize >> 1);
> +
> + init_waitqueue_head(&prv->irq_waitq);
> + retval = devm_request_irq(dev, prv->irq, &mpc5121_nfc_irq, 0,
> DRV_NAME,
> + mtd);
> + if (retval) {
> + dev_err(dev, "Error requesting IRQ!\n");
> + goto error;
> + }
> +
> + /* Detect NAND chips */
> + if (nand_scan(mtd, *chips_no)) {
> + dev_err(dev, "NAND Flash not found !\n");
> + devm_free_irq(dev, prv->irq, mtd);
> + retval = -ENXIO;
> + goto error;
> + }
> +
> + /* Set erase block size */
> + switch (mtd->erasesize / mtd->writesize) {
> + case 32:
> + nfc_set(mtd, NFC_CONFIG1, NFC_PPB_32);
> + break;
> +
> + case 64:
> + nfc_set(mtd, NFC_CONFIG1, NFC_PPB_64);
> + break;
> +
> + case 128:
> + nfc_set(mtd, NFC_CONFIG1, NFC_PPB_128);
> + break;
> +
> + case 256:
> + nfc_set(mtd, NFC_CONFIG1, NFC_PPB_256);
> + break;
> +
> + default:
> + dev_err(dev, "Unsupported NAND flash!\n");
> + devm_free_irq(dev, prv->irq, mtd);
> + retval = -ENXIO;
> + goto error;
> + }
> +
> + dev_set_drvdata(dev, mtd);
> +
> + /* Register device in MTD */
> +#ifdef CONFIG_MTD_PARTITIONS
> + retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0);
> +#ifdef CONFIG_MTD_OF_PARTS
> + if (retval == 0)
> + retval = of_mtd_parse_partitions(dev, dn, &parts);
> +#endif
> + if (retval < 0) {
> + dev_err(dev, "Error parsing MTD partitions!\n");
> + devm_free_irq(dev, prv->irq, mtd);
> + retval = -EINVAL;
> + goto error;
> + }
> +
> + if (retval > 0)
> + retval = add_mtd_partitions(mtd, parts, retval);
> + else
> +#endif
> + retval = add_mtd_device(mtd);
> +
> + if (retval) {
> + dev_err(dev, "Error adding MTD device!\n");
> + devm_free_irq(dev, prv->irq, mtd);
> + goto error;
> + }
> +
> + return 0;
> +error:
> + mpc5121_nfc_free(dev, mtd);
> + return retval;
> +}
> +
> +static int __devexit mpc5121_nfc_remove(struct of_device *op)
> +{
> + struct device *dev = &op->dev;
> + struct mtd_info *mtd = dev_get_drvdata(dev);
> + struct nand_chip *chip = mtd->priv;
> + struct mpc5121_nfc_prv *prv = chip->priv;
> +
> + nand_release(mtd);
> + devm_free_irq(dev, prv->irq, mtd);
> + mpc5121_nfc_free(dev, mtd);
> +
> + return 0;
> +}
> +
> +static struct of_device_id mpc5121_nfc_match[] __devinitdata = {
> + { .compatible = "fsl,mpc5121-nfc", },
> + {},
> +};
> +
> +static struct of_platform_driver mpc5121_nfc_driver = {
> + .match_table = mpc5121_nfc_match,
> + .probe = mpc5121_nfc_probe,
> + .remove = __devexit_p(mpc5121_nfc_remove),
> + .driver = {
> + .name = DRV_NAME,
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init mpc5121_nfc_init(void)
> +{
> + return of_register_platform_driver(&mpc5121_nfc_driver);
> +}
> +
> +module_init(mpc5121_nfc_init);
> +
> +static void __exit mpc5121_nfc_cleanup(void)
> +{
> + of_unregister_platform_driver(&mpc5121_nfc_driver);
> +}
> +
> +module_exit(mpc5121_nfc_cleanup);
> +
> +MODULE_AUTHOR("Freescale Semiconductor, Inc.");
> +MODULE_DESCRIPTION("MPC5121 NAND MTD driver");
> +MODULE_LICENSE("GPL");
> --
> 1.6.3.3
>
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
