Collects several changes needed after applying
previous mpc5121 platform and driver patches:
- Add mpc5121 reset module node
- Clean up and fix NAND description, remove unused properties
here and correct NAND flash chip size.
- Add I2C RTC node for m41t80 RTC
- Fix compatible property in DMA node
- Remove unused cell-index properties from CAN nodes
- Fix compatible property in DIU node
- USB node changes:
- remove 'port0/1' properties as these are only used
for multi-port host(MHP) module which is not available
on MPC5121.
- MPC5121 Rev 2.0 EHCI registers are big endian.
'big-endian-regs' property in USB node indicates
this now.
- use 'invert-drvvbus' and 'invert-pwr-fault' in
USB node for internal PHY to specify polarities
of appropriate port pins.
Signed-off-by: Piotr Ziecik <ko...@semihalf.com>
Signed-off-by: Wolfgang Denk <w...@denx.de>
Signed-off-by: Detlev Zundel <d...@denx.de>
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
Cc: Grant Likely <grant.lik...@secretlab.ca>
---
arch/powerpc/boot/dts/mpc5121ads.dts | 35 +++++++++++++++++++--------------
1 files changed, 20 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts
b/arch/powerpc/boot/dts/mpc5121ads.dts
index c353dac..22c107f 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -62,17 +62,12 @@
interrupt-parent = < &ipic >;
#address-cells = <1>;
#size-cells = <1>;
- bank-width = <1>;
// ADS has two Hynix 512MB Nand flash chips in a single
- // stacked package .
+ // stacked package.
chips = <2>;
- na...@0 {
- label = "nand0";
- reg = <0x00000000 0x02000000>; // first 32 MB of chip 0
- };
- na...@20000000 {
- label = "nand1";
- reg = <0x20000000 0x02000000>; // first 32 MB of chip 1
+ n...@0 {
+ label = "nand";
+ reg = <0x00000000 0x40000000>; // 512MB + 512MB
};
};
@@ -166,6 +161,11 @@
interrupt-parent = < &ipic >;
};
+ re...@e00 { // Reset module
+ compatible = "fsl,mpc5121-reset";
+ reg = <0xe00 0x100>;
+ };
+
cl...@f00 { // Clock control
compatible = "fsl,mpc5121-clock";
reg = <0xf00 0x100>;
@@ -187,7 +187,6 @@
ms...@1300 {
compatible = "fsl,mpc5121-mscan";
- cell-index = <0>;
interrupts = <12 0x8>;
interrupt-parent = < &ipic >;
reg = <0x1300 0x80>;
@@ -195,7 +194,6 @@
ms...@1380 {
compatible = "fsl,mpc5121-mscan";
- cell-index = <1>;
interrupts = <13 0x8>;
interrupt-parent = < &ipic >;
reg = <0x1380 0x80>;
@@ -219,6 +217,11 @@
reg = <0x1720 0x20>;
interrupts = <10 0x8>;
interrupt-parent = < &ipic >;
+
+ r...@68 {
+ compatible = "stm,m41t80";
+ reg = <0x68>;
+ };
};
i...@1740 {
@@ -244,7 +247,7 @@
};
disp...@2100 {
- compatible = "fsl,mpc5121-diu", "fsl-diu";
+ compatible = "fsl,mpc5121-diu", "fsl,diu";
reg = <0x2100 0x100>;
interrupts = <64 0x8>;
interrupt-parent = < &ipic >;
@@ -285,7 +288,7 @@
// interrupts = <43 0x8>;
// dr_mode = "otg";
// phy_type = "ulpi";
- // port1;
+ // big-endian-regs;
//};
// USB0 using internal UTMI PHY
@@ -298,7 +301,9 @@
interrupts = <44 0x8>;
dr_mode = "otg";
phy_type = "utmi_wide";
- port0;
+ big-endian-regs;
+ invert-drvvbus;
+ invert-pwr-fault;
};
// IO control
@@ -365,7 +370,7 @@
};
d...@14000 {
- compatible = "fsl,mpc5121-dma2";
+ compatible = "fsl,mpc5121-dma";
reg = <0x14000 0x1800>;
interrupts = <65 0x8>;
interrupt-parent = < &ipic >;
--
1.5.6.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
