Hello, All,
Happy New Year to everyone!
I am running ppc440epx board which is similar Sequoia board. I have configured
a I2C RTC device. From the console debug message, it is working, but I do not
see /dev/rtc0 file. My kernel version is 2.6.30.4. I use initramfs as my root
file system. Here is my initramfs.txt:
dir /dev 755 0 0
dir /bin 755 1000 1000
dir /proc 755 0 0
slink /bin/sh busybox 777 0 0
file /bin/busybox /home/awang/proj/linux-2.6.30.4/usr/busybox 755 0 0
dir /sys 755 0 0
dir /usr 755 0 0
dir /usr/bin 755 0 0
dir /usr/sbin 755 0 0
dir /sbin 755 0 0
dir /mnt 755 0 0
dir /etc 755 0 0
dir /var 755 0 0
file /init /home/awang/proj/linux-2.6.30.4/usr/init.sh 755 0 0
Here is my init.sh:
#!/bin/sh
/bin/busybox echo " "
/bin/busybox echo "Hello, I am alive!!!!"
busybox mkdir /mnt/flash
busybox mount -t proc /proc /proc
busybox mount -t sysfs none /sys
busybox mount -t jffs2 mtd2 /mnt/flash
busybox sleep 2
/bin/busybox --install -s
#start a shell
ifconfig eth0 192.168.0.201
/bin/sh
Here is my configurations:
RTC kernel configuration:
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
dts configuration:
IIC0: i...@ef600700 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ibm,iic-440epx", "ibm,iic";
reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
r...@68 {
compatible = "stm,m41t80";
reg = <0x68>;
};
eepr...@50 {
compatible = "eeprom";
reg = <0x50>;
};
eepr...@54 {
compatible = "eeprom";
reg = <0x54>;
};
};
The debug messages:
i2c /dev entries driver
rtc-m41t80 1-0068: chip found, driver version 0.05
rtc-m41t80 1-0068: rtc core: registered m41t80 as rtc0
ibm-iic 1ef600700.i2c: using standard (100 kHz) mode
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
TIPC: Activated (version 1.6.4 compiled Jan 3 2010 12:21:35)
NET: Registered protocol family 30
TIPC: Started in single node mode
rtc-m41t80 1-0068: setting system clock to 2010-01-03 19:43:06 UTC (1262547786)
I have struggled for a few days. Thank you very much.
Allan
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
