Scott Wood <scottw...@freescale.com> wrote on 30/10/2009 18:37:49:
>
> On Fri, Oct 30, 2009 at 12:16:07PM -0500, Scott Wood wrote:
> > On Sat, Oct 17, 2009 at 02:01:38PM +0200, Joakim Tjernlund wrote:
> > > + mfspr r10, SPRN_SRR0
> > > DO_8xx_CPU6(0x3780, r3)
> > > mtspr SPRN_MD_EPN, r10
> > > mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */
> > > - lwz r11, 0(r11) /* Get the level 1 entry */
> > > + cmplwi cr0, r11, 0x0800
> > > + blt- 3f /* Branch if user space */
> > > + lis r11, swapper_pg_...@h
> > > + ori r11, r11, swapper_pg_...@l
> > > + rlwimi r11, r11, 0, 2, 19
> >
> > That rlwimi is a no-op -- I think you meant to use a different register
> > here?
> >
> > > +3: lwz r11, 0(r11) /* Get the level 1 entry */
> > > DO_8xx_CPU6(0x3b80, r3)
> > > mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
> > > mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
> > > lwz r11, 0(r11) /* Get the pte */
> > > /* concat physical page address(r11) and page offset(r10) */
> > > rlwimi r11, r10, 0, 20, 31
> >
> > But r10 here contains SRR0 from above, and this is a data TLB error.
>
> Never mind that last one, forgot that you'd be wanting to load the
> instruction. :-P
>
> But the rlwimi is what's causing the machine checks. I replaced it with:
> rlwinm r11, r11, 0, 0x3ffff000
> rlwimi r11, r10, 22, 0xffc
>
> and things seem to work. You could probably replace the rlwinm by
> subtracting PAGE_OFFSET from swapper_pg_dir instead.
Just guessing here, do you mean:
lis r11, (swapper_pg_dir-PAGE_OFFSET)@h
ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
rlwimi r11, r10, 22, 0xffc
or
lis r11, swapper_pg_...@h
ori r11, r11, swapper_pg_...@l
subis r11, r11 PAGE_OFFSET
rlwimi r11, r10, 22, 0xffc
Jocke
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
