- serial Console on PSC1 - 64MB SDRAM - MTD CFI Flash - Ethernet FEC - IDE support
Signed-off-by: Heiko Schocher <h...@denx.de> Reviewed-by: Wolfram Sang <w.s...@pengutronix.de> --- - based on: git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next - checked with: $ ./scripts/checkpatch.pl 0002-mpc5200-support-for-the-MAN-mpc5200-based-board-muc.patch total: 0 errors, 0 warnings, 360 lines checked 0002-mpc5200-support-for-the-MAN-mpc5200-based-board-muc.patch has no obvious style problems and is ready for submission. $ changes since v1: - add comments from Grant Likely <grant.lik...@secretlab.ca> use mpc5200_defconfig as default configuration, therefore added SIMPLE_GPIO support in it, because this is not selectable as a module. - add comments from Wolfram Sang <w.s...@pengutronix.de> - rebase against current next changes since v2: - add comment from Wolfram Sang remove unofficial binding changes since v3: - add comment from Wolfram Sang use "fsl,mpc5200b-immr" only added Reviewed-by: Wolfram Sang <w.s...@pengutronix.de> arch/powerpc/boot/dts/mucmc52.dts | 345 ++++++++++++++++++++++++++ arch/powerpc/configs/mpc5200_defconfig | 2 +- arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 3 files changed, 347 insertions(+), 1 deletions(-) create mode 100644 arch/powerpc/boot/dts/mucmc52.dts diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts new file mode 100644 index 0000000..7b29d76 --- /dev/null +++ b/arch/powerpc/boot/dts/mucmc52.dts @@ -0,0 +1,345 @@ +/* + * mucmc52 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher <h...@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "manroland,mucmc52"; + compatible = "manroland,mucmc52"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5...@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5...@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + c...@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-control...@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + interrupts = <0 0 3>; + }; + + gpt0: ti...@600 { // GPT 0 in GPIO mode + compatible = "fsl,mpc5200b-gpt-gpio", + "fsl,mpc5200-gpt-gpio"; + #gpio-cells = <2>; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + gpio-controller; + }; + + gpt1: ti...@610 { // GPT 1 in GPIO mode + compatible = "fsl,mpc5200b-gpt-gpio", + "fsl,mpc5200-gpt-gpio"; + #gpio-cells = <2>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + gpio-controller; + }; + + gpt2: ti...@620 { // GPT 2 in GPIO mode + compatible = "fsl,mpc5200b-gpt-gpio", + "fsl,mpc5200-gpt-gpio"; + #gpio-cells = <2>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + gpio-controller; + }; + + gpt3: ti...@630 { // GPT 3 in GPIO mode + compatible = "fsl,mpc5200b-gpt-gpio", + "fsl,mpc5200-gpt-gpio"; + #gpio-cells = <2>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + gpio-controller; + }; + + gpio_simple: g...@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + #gpio-cells = <2>; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + }; + + gpio_wkup: g...@c00 { + compatible = "fsl,mpc5200b-gpio-wkup", + "fsl,mpc5200-gpio-wkup"; + #gpio-cells = <2>; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + }; + + dma-control...@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200b-bestcomm", + "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + x...@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + ser...@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart", + "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + ser...@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-uart", + "fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + ser...@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart", + "fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 6 0>; + }; + + ether...@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + m...@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to + // setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command + // finished", not link changes + // & co. + + phy0: ethernet-...@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + a...@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i...@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c", + "fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + hw...@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + r...@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + s...@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + fl...@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + partit...@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partit...@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partit...@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partit...@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partit...@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partit...@740000 { + label = "Env"; + reg = <0x00740000 0x00020000>; + }; + partit...@760000 { + label = "red. Env"; + reg = <0x00760000 0x00020000>; + }; + partit...@780000 { + label = "reserve"; + reg = <0x00780000 0x00080000>; + }; + }; + + simple100: gpio-controller-...@3,600100 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600100 0x1>; + gpio-controller; + }; + simple104: gpio-controller-...@3,600104 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600104 0x1>; + gpio-controller; + }; + simple200: gpio-controller-...@3,600200 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600200 0x1>; + gpio-controller; + }; + simple201: gpio-controller-...@3,600201 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600201 0x1>; + gpio-controller; + }; + simple202: gpio-controller-...@3,600202 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600202 0x1>; + gpio-controller; + }; + simple203: gpio-controller-...@3,600203 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600203 0x1>; + gpio-controller; + }; + simple204: gpio-controller-...@3,600204 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600204 0x1>; + gpio-controller; + }; + simple206: gpio-controller-...@3,600206 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600206 0x1>; + gpio-controller; + }; + simple207: gpio-controller-...@3,600207 { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600207 0x1>; + gpio-controller; + }; + simple20f: gpio-controller-...@3,60020f { + #gpio-cells = <2>; + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x0060020f 0x1>; + gpio-controller; + }; + + }; + + p...@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 */ + 0x8000 0 0 1 &mpc5200_pic 0 3 3 + 0x8000 0 0 2 &mpc5200_pic 0 3 3 + 0x8000 0 0 3 &mpc5200_pic 0 2 3 + 0x8000 0 0 4 &mpc5200_pic 0 1 3 + >; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index aaa4416..d035421 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -205,7 +205,7 @@ CONFIG_RTAS_PROC=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_SIMPLE_GPIO is not set +CONFIG_SIMPLE_GPIO=y # # Kernel options diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index caf6d92..d45be5b 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static char *board[] __initdata = { "intercontrol,digsy-mtc", + "manroland,mucmc52", "manroland,uc101", "phytec,pcm030", "phytec,pcm032", -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev