Dear Mr Denk,
thanks for your reply. I checked out kernel 2.6.30.3 stable for testing too.
I mean it's really a Lite5200. That is the U-boot boot message:
U-Boot 2009.06 (Aug 26 2009 - 08:23:36)
CPU: MPC5200 v1.2, Core v1.1 at 231 MHz
Bus 66 MHz, IPB 33 MHz, PCI 16.500 MHz
Board: Motorola MPC5200 (IceCube)
I2C: 85 kHz, ready
DRAM: 64 MB
FLASH: 16 MB
PCI: Bus Dev VenId DevId Class Int
00 1a 1057 5803 0680 00
In: serial
Out: serial
Err: serial
Net: FEC ETHERNET
IDE: Bus 0: not available
For kernel I use:
make ARCH=powerpc CROSS_COMPILE=ppc_6xx- mrproper
make ARCH=powerpc CROSS_COMPILE=ppc_6xx- 52xx/lite5200b_defconfig
make ARCH=powerpc CROSS_COMPILE=ppc_6xx- uImage
make ARCH=powerpc CROSS_COMPILE=ppc_6xx- modules
make ARCH=powerpc CROSS_COMPILE=ppc_6xx- modules_install
And the device tree lite5200.dts
make ARCH=powerpc CROSS_COMPILE=ppc_6xx- lite5200.dtb
And the U-boot configuration:
=> print kernel_addr fdt_addr bootargs
kernel_addr=900000
fdt_addr=b00000
bootargs=console=ttyPSC0,115200 root=/dev/nfs rw nfsroot=10.10.0.2:/opt/eldk/ppc
_82xx ip=10.10.0.99:10.10.0.2::255.255.255.0:icecube::off panic=1
=> print bootfile dtbfile
bootfile=/tftpboot/uImage
dtbfile=/tftpboot/lite5200.dtb
=> tftp ${kernel_addr} ${boofile}; tftp ${fdt_addr} ${dtbfile}
Using FEC ETHERNET device
TFTP from server 10.10.0.2; our IP address is 10.10.0.99
Filename '/tftpboot/uImage'.
Load address: 0x900000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#############################
done
Bytes transferred = 1478573 (168fad hex)
Using FEC ETHERNET device
TFTP from server 10.10.0.2; our IP address is 10.10.0.99
Filename '/tftpboot/lite5200.dtb'.
Load address: 0xb00000
Loading: ##
done
Bytes transferred = 5375 (14ff hex)
=> bootm ${kernel_addr} - ${fdt_addr}
## Booting kernel from Legacy Image at 00900000 ...
Image Name: Linux-2.6.30.3-00002-gdae6b8c
Created: 2009-08-27 13:55:57 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1478509 Bytes = 1.4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 00b00000
Booting using the fdt blob at 0xb00000
Uncompressing Kernel Image ... OK
Loading Device Tree to 007fb000, end 007ff4fe ... OK
[ 0.000000] Using lite5200 machine description
[ 0.000000] Linux version 2.6.30.3-00002-gdae6b8c (r...@user-laptop) (gcc ver
sion 4.2.2) #1 Thu Aug 27 15:55:37 CEST 2009
------snip---------
[ 2346.499181] VFS: Mounted root (nfs filesystem) on device 0:11.
[ 2346.505748] Freeing unused kernel memory: 160k init
[ 2346.865420] net eth0: FEC_IEVENT_RFIFO_ERROR
[ 2346.871668] ------------[ cut here ]------------
[ 2346.876434] Kernel BUG at c01ae1d0 [verbose debug info unavailable]
[ 2346.882852] Oops: Exception in kernel mode, sig: 5 [#1]
[ 2346.888184] lite5200
[ 2346.890416] Modules linked in:
[ 2346.893544] NIP: c01ae1d0 LR: c01af504 CTR: c0011190
[ 2346.898622] REGS: c02ff9e0 TRAP: 0700 Not tainted (2.6.30.3-00002-gdae6b8
[ 2346.905991] MSR: 00029032 <EE,ME,CE,IR,DR> CR: 24000024 XER: 00000000
[ 2346.912796] TASK = c02dc588[0] 'swapper' THREAD: c02fe000
[ 2346.918127] GPR00: 00010200 c02ffa90 c02dc588 c3954e00 00000001 00000000 0000
8000 00000000
[ 2346.926693] GPR08: 000000a2 c02fe000 c0327000 c5036000 84000022 ffcf5fff 03fb
8000 03fa8878
[ 2346.935261] GPR16: 03f81ae8 03fa8854 03f45dcc 03f45ccc 03f45bee c031a138 c389
be00 0a0a0063
[ 2346.943830] GPR24: c03191a8 00008000 00000000 00000001 c3835b20 c3954e00 c383
5800 08820000
[ 2346.952582] Call Trace:
[ 2346.955088] [c02ffa90] [c01aefac] 0xc01aefac (unreliable)
[ 2346.960611] [c02ffac0] [c01af504] 0xc01af504
[ 2346.964977] [c02ffae0] [c01af8a4] 0xc01af8a4
[ 2346.969344] --- Exception: c38eb0f0 at 0xc38eb0c0
[ 2346.969361] LR = 0xc02ddfc0
[ 2346.977347] [c02ffb00] [c004e6c0] 0xc004e6c0 (unreliable)
[ 2346.982869] [c02ffb20] [c0050a7c] 0xc0050a7c
[ 2346.987232] [c02ffb30] [c0006514] 0xc0006514
[ 2346.991595] [c02ffb50] [c0012014] 0xc0012014
[ 2346.995962] --- Exception: 501 at 0xc0035db8
[ 2346.995978] LR = 0xc0035db0
[ 2347.003522] [c02ffc30] [c0035e70] 0xc0035e70
[ 2347.007889] [c02ffc40] [c02322e4] 0xc02322e4
[ 2347.012255] [c02ffc70] [c0232ddc] 0xc0232ddc
[ 2347.016621] [c02ffc80] [c022d0b8] 0xc022d0b8
[ 2347.020985] [c02ffca0] [c0231250] 0xc0231250
[ 2347.025351] [c02ffcd0] [c01bb904] 0xc01bb904
[ 2347.029715] [c02ffcf0] [c0203cbc] 0xc0203cbc
[ 2347.034082] [c02ffd10] [c02052cc] 0xc02052cc
[ 2347.038447] [c02ffd60] [c01e2f78] 0xc01e2f78
[ 2347.042811] [c02ffd80] [c01e3360] 0xc01e3360
[ 2347.047176] [c02ffdb0] [c01c7688] 0xc01c7688
[ 2347.051541] [c02ffde0] [c01c9ec8] 0xc01c9ec8
[ 2347.055905] [c02ffe10] [c01ca200] 0xc01ca200
[ 2347.060273] [c02ffe40] [c00296c0] 0xc00296c0
[ 2347.064640] [c02ffe70] [c0006474] 0xc0006474
[ 2347.069005] [c02ffe80] [c0029538] 0xc0029538
[ 2347.073368] [c02ffe90] [c0006518] 0xc0006518
[ 2347.077733] [c02ffeb0] [c0012014] 0xc0012014
[ 2347.082097] --- Exception: 501 at 0xc001fa98
[ 2347.082113] LR = 0xc024af4c
[ 2347.089655] [c02fff70] [c030648c] 0xc030648c (unreliable)
[ 2347.095178] [c02fff80] [c024af4c] 0xc024af4c
[ 2347.099544] [c02fff90] [c0009360] 0xc0009360
[ 2347.103912] [c02fffb0] [c0003e04] 0xc0003e04
[ 2347.108280] [c02fffc0] [c02b280c] 0xc02b280c
[ 2347.112644] [c02ffff0] [00003438] 0x003438
[ 2347.116829] Instruction dump:
[ 2347.119865] 4e800020 9421ffd0 7c0802a6 bf210014 54290024 7c7d1b78 90010034 7c
9b2378
[ 2347.127818] 7cba2b78 7cd93378 8009000c 5400016e <0f000000> 3b830028 7f83e378
4809d545
[ 2347.135966] Kernel panic - not syncing: Fatal exception in interrupt
[ 2347.142459] Rebooting in 1 seconds..
Then I enabled "Verbose debug info" in the kernel:
------snip---------
[ 0.000000] Kernel command line: console=ttyPSC0,115200 root=/dev/nfs rw nfsr
oot=10.10.0.2:/opt/eldk/ppc_82xx ip=10.10.0.99:10.10.0.2::255.255.255.0:icecube:
:off panic=1
[ 0.000000] NR_IRQS:512
[ 0.000000] MPC52xx PIC is up and running!
[ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
[ 0.000000] clocksource: timebase mult[f26c9b2] shift[22] registered
[ 0.000713] console [ttyPSC0] enabled
[ 0.117286] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.125426] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.152478] Memory: 61656k/65536k available (2924k kernel code, 3816k reserve
d, 144k data, 108k bss, 160k init)
[ 0.162876] Kernel virtual memory layout:
[ 0.167060] * 0xffffe000..0xfffff000 : fixmap
[ 0.171855] * 0xfcff7000..0xfe000000 : early ioremap
[ 0.177269] * 0xc5000000..0xfcff7000 : vmalloc & ioremap
[ 0.183361] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, N
odes=1
[ 0.191369] Calibrating delay loop... 32.89 BogoMIPS (lpj=65792)
[ 0.282554] Mount-cache hash table entries: 512
[ 0.296476] net_namespace: 520 bytes
[ 0.302403] NET: Registered protocol family 16
[ 0.358376] PCI: Probing PCI hardware
[ 0.366037] DMA: MPC52xx BestComm driver
[ 0.370969] DMA: MPC52xx BestComm engine @f0001200 ok !
[ 0.426505] bio: create slab <bio-0> at 0
[ 0.437399] SCSI subsystem initialized
[ 0.462352] NET: Registered protocol family 2
[ 0.467454] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.476064] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.483852] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.490731] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.497361] TCP reno registered
[ 0.501444] NET: Registered protocol family 1
[ 0.611975] msgmni has been set to 120
[ 0.620172] alg: No test for stdrng (krng)
[ 0.624938] io scheduler noop registered
[ 0.629262] io scheduler anticipatory registered (default)
[ 0.635048] io scheduler deadline registered
[ 0.640058] io scheduler cfq registered
[ 1.812580] Generic RTC Driver v1.07
[ 1.819176] Serial: MPC52xx PSC UART driver
[ 1.824364] f0002000.serial: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC5
2xx PSC
[ 1.882486] brd: module loaded
[ 1.909250] loop: module loaded
[ 1.914148] Driver 'sd' needs updating - please use bus_type methods
[ 1.922284] ata: MPC52xx IDE/ATA libata driver
[ 1.929082] scsi0 : mpc52xx_ata
[ 1.934723] ata1: PATA max PIO4 ata_regs 0xf0003a00 irq 135
[ 1.994561] mpc52xx MII bus: probed
[ 2.003553] net eth0: Using PHY at MDIO address 1
[ 2.010075] i2c /dev entries driver
[ 2.029480] TCP cubic registered
[ 2.033132] NET: Registered protocol family 17
[ 2.040730] RPC: Registered udp transport module.
[ 2.045776] RPC: Registered tcp transport module.
[ 2.574473] net eth0: attached phy 1 to driver Generic PHY
[ 3.582953] IP-Config: Complete:
[ 3.586267] device=eth0, addr=10.10.0.99, mask=255.255.255.0, gw=255.255
.255.255,
[ 3.594532] host=icecube, domain=, nis-domain=(none),
[ 3.600258] bootserver=10.10.0.2, rootserver=10.10.0.2, rootpath=
[ 3.608107] Looking up port of RPC 100003/2 on 10.10.0.2
[ 3.619215] Looking up port of RPC 100005/1 on 10.10.0.2
[ 3.714264] VFS: Mounted root (nfs filesystem) on device 0:11.
[ 3.720825] Freeing unused kernel memory: 160k init
[ 3.871314] net eth0: FEC_IEVENT_RFIFO_ERROR
[ 3.877660] ------------[ cut here ]------------
[ 3.882425] kernel BUG at drivers/net/phy/mdio_bus.c:263!
[ 3.887951] Oops: Exception in kernel mode, sig: 5 [#1]
[ 3.893276] lite5200
[ 3.895502] Modules linked in:
[ 3.898630] NIP: c01ae268 LR: c01af59c CTR: c0011190
[ 3.903707] REGS: c38253a0 TRAP: 0700 Not tainted (2.6.30.3-00002-gdae6b8c
)
[ 3.911070] MSR: 00029032 <EE,ME,CE,IR,DR> CR: 22002024 XER: 00000000
[ 3.917871] TASK = c3820000[1] 'init' THREAD: c3824000
[ 3.922933] GPR00: 00010100 c3825450 c3820000 c3922e00 00000001 00000000 0000
8000 00000000
[ 3.931497] GPR08: 00000035 c3824000 c0329000 c5036000 22002022 ffcf5fff c031
b1a8 0a0a0002
[ 3.940061] GPR16: 00000000 00000000 00000000 00000801 00000000 c39366c0 0000
0000 c39f6930
[ 3.948626] GPR24: 00000000 00008000 00000000 00000001 c383fb20 c3922e00 c383
f800 08820000
[ 3.957367] Call Trace:
[ 3.959867] [c3825450] [c01af044] 0xc01af044 (unreliable)
[ 3.965382] [c3825480] [c01af59c] 0xc01af59c
[ 3.969745] [c38254a0] [c01af93c] 0xc01af93c
[ 3.974108] [c38254c0] [c004e6c4] 0xc004e6c4
[ 3.978471] [c38254e0] [c0050a80] 0xc0050a80
[ 3.982830] [c38254f0] [c0006514] 0xc0006514
[ 3.987189] [c3825510] [c0012014] 0xc0012014
[ 3.991552] --- Exception: 501 at 0xc0016540
[ 3.991566] LR = 0xc01bed30
[ 3.999106] [c38255d0] [c01c9f60] 0xc01c9f60 (unreliable)
[ 4.004625] [c3825610] [c022eca8] 0xc022eca8
[ 4.008987] [c3825630] [c022ea20] 0xc022ea20
[ 4.013349] [c3825670] [c022eae0] 0xc022eae0
[ 4.017709] [c3825690] [c0231234] 0xc0231234
[ 4.022072] [c38256c0] [c01bb99c] 0xc01bb99c
[ 4.026434] [c38256e0] [c0203d54] 0xc0203d54
[ 4.030795] [c3825700] [c01ba4f4] 0xc01ba4f4
[ 4.035155] [c3825720] [c02059fc] 0xc02059fc
[ 4.039518] [c38257d0] [c020cdf0] 0xc020cdf0
[ 4.043878] [c38257f0] [c01b8a78] 0xc01b8a78
[ 4.048242] [c38258d0] [c01b8e5c] 0xc01b8e5c
[ 4.052605] [c38258f0] [c022f448] 0xc022f448
[ 4.056967] [c3825930] [c022f4f8] 0xc022f4f8
[ 4.061329] [c3825960] [c0231044] 0xc0231044
[ 4.065690] [c3825980] [c022defc] 0xc022defc
[ 4.070052] [c38259b0] [c022c064] 0xc022c064
[ 4.074413] [c38259d0] [c02327b0] 0xc02327b0
[ 4.078774] [c3825a10] [c022b200] 0xc022b200
[ 4.083136] [c3825a20] [c0101b38] 0xc0101b38
[ 4.087499] [c3825a90] [c00ff5c4] 0xc00ff5c4
[ 4.091861] [c3825aa0] [c00ff658] 0xc00ff658
[ 4.096221] [c3825ab0] [c0101624] 0xc0101624
[ 4.100581] [c3825ad0] [c005bcdc] 0xc005bcdc
[ 4.104943] [c3825b00] [c01012a4] 0xc01012a4
[ 4.109307] [c3825b60] [c005b77c] 0xc005b77c
[ 4.113667] [c3825bb0] [c0055454] 0xc0055454
[ 4.118029] [c3825bf0] [c0066ac0] 0xc0066ac0
[ 4.122392] [c3825c40] [c00147e8] 0xc00147e8
[ 4.126754] [c3825cf0] [c0011dac] 0xc0011dac
[ 4.131116] --- Exception: 301 at 0xc0016300
[ 4.131130] LR = 0xc00b6f18
[ 4.138667] [c3825db0] [c396b9b4] 0xc396b9b4 (unreliable)
[ 4.144186] [c3825dd0] [c00b8454] 0xc00b8454
[ 4.148548] [c3825e60] [c00841b4] 0xc00841b4
[ 4.152911] [c3825e90] [c00851d4] 0xc00851d4
[ 4.157272] [c3825ed0] [c0008c28] 0xc0008c28
[ 4.161634] [c3825ef0] [c001197c] 0xc001197c
[ 4.165998] --- Exception: c01 at 0xc0010d54
[ 4.166012] LR = 0xc0003a18
[ 4.173550] [c3825fb0] [c008c634] 0xc008c634 (unreliable)
[ 4.179068] [c3825fc0] [c0003adc] 0xc0003adc
[ 4.183431] [c3825fd0] [c02b31f0] 0xc02b31f0
[ 4.187792] [c3825ff0] [c00117a0] 0xc00117a0
[ 4.192147] Instruction dump:
[ 4.195178] 4e800020 9421ffd0 7c0802a6 bf210014 54290024 7c7d1b78 90010034 7c
9b2378
[ 4.203121] 7cba2b78 7cd93378 8009000c 5400016e <0f000000> 3b830028 7f83e378
4809d555
[ 4.211252] Kernel panic - not syncing: Fatal exception in interrupt
[ 4.217731] Call Trace:
[ 4.220227] [c38251f0] [c0008274] 0xc0008274 (unreliable)
[ 4.225743] [c3825230] [c0023b4c] 0xc0023b4c
[ 4.230103] [c3825280] [c000f678] 0xc000f678
[ 4.234463] [c38252a0] [c000f900] 0xc000f900
[ 4.238828] [c3825390] [c0011fc8] 0xc0011fc8
[ 4.243188] --- Exception: 700 at 0xc01ae268
[ 4.243202] LR = 0xc01af59c
[ 4.250742] [c3825450] [c01af044] 0xc01af044 (unreliable)
[ 4.256259] [c3825480] [c01af59c] 0xc01af59c
[ 4.260618] [c38254a0] [c01af93c] 0xc01af93c
[ 4.264979] [c38254c0] [c004e6c4] 0xc004e6c4
[ 4.269338] [c38254e0] [c0050a80] 0xc0050a80
[ 4.273701] [c38254f0] [c0006514] 0xc0006514
[ 4.278062] [c3825510] [c0012014] 0xc0012014
[ 4.282421] --- Exception: 501 at 0xc0016540
[ 4.282435] LR = 0xc01bed30
[ 4.289973] [c38255d0] [c01c9f60] 0xc01c9f60 (unreliable)
[ 4.295492] [c3825610] [c022eca8] 0xc022eca8
[ 4.299858] [c3825630] [c022ea20] 0xc022ea20
[ 4.304217] [c3825670] [c022eae0] 0xc022eae0
[ 4.308580] [c3825690] [c0231234] 0xc0231234
[ 4.312941] [c38256c0] [c01bb99c] 0xc01bb99c
[ 4.317304] [c38256e0] [c0203d54] 0xc0203d54
[ 4.321666] [c3825700] [c01ba4f4] 0xc01ba4f4
[ 4.326027] [c3825720] [c02059fc] 0xc02059fc
[ 4.330388] [c38257d0] [c020cdf0] 0xc020cdf0
[ 4.334749] [c38257f0] [c01b8a78] 0xc01b8a78
[ 4.339111] [c38258d0] [c01b8e5c] 0xc01b8e5c
[ 4.343472] [c38258f0] [c022f448] 0xc022f448
[ 4.347833] [c3825930] [c022f4f8] 0xc022f4f8
[ 4.352195] [c3825960] [c0231044] 0xc0231044
[ 4.356557] [c3825980] [c022defc] 0xc022defc
[ 4.360920] [c38259b0] [c022c064] 0xc022c064
[ 4.365282] [c38259d0] [c02327b0] 0xc02327b0
[ 4.369641] [c3825a10] [c022b200] 0xc022b200
[ 4.374003] [c3825a20] [c0101b38] 0xc0101b38
[ 4.378364] [c3825a90] [c00ff5c4] 0xc00ff5c4
[ 4.382726] [c3825aa0] [c00ff658] 0xc00ff658
[ 4.387087] [c3825ab0] [c0101624] 0xc0101624
[ 4.391448] [c3825ad0] [c005bcdc] 0xc005bcdc
[ 4.395810] [c3825b00] [c01012a4] 0xc01012a4
[ 4.400171] [c3825b60] [c005b77c] 0xc005b77c
[ 4.404533] [c3825bb0] [c0055454] 0xc0055454
[ 4.408894] [c3825bf0] [c0066ac0] 0xc0066ac0
[ 4.413254] [c3825c40] [c00147e8] 0xc00147e8
[ 4.417616] [c3825cf0] [c0011dac] 0xc0011dac
[ 4.421977] --- Exception: 301 at 0xc0016300
[ 4.421991] LR = 0xc00b6f18
[ 4.429529] [c3825db0] [c396b9b4] 0xc396b9b4 (unreliable)
[ 4.435045] [c3825dd0] [c00b8454] 0xc00b8454
[ 4.439409] [c3825e60] [c00841b4] 0xc00841b4
[ 4.443770] [c3825e90] [c00851d4] 0xc00851d4
[ 4.448131] [c3825ed0] [c0008c28] 0xc0008c28
[ 4.452492] [c3825ef0] [c001197c] 0xc001197c
[ 4.456850] --- Exception: c01 at 0xc0010d54
[ 4.456865] LR = 0xc0003a18
[ 4.464401] [c3825fb0] [c008c634] 0xc008c634 (unreliable)
[ 4.469920] [c3825fc0] [c0003adc] 0xc0003adc
[ 4.474281] [c3825fd0] [c02b31f0] 0xc02b31f0
[ 4.478643] [c3825ff0] [c00117a0] 0xc00117a0
[ 4.483009] Rebooting in 1 seconds..
Anyone an idea, what I do wrong?
Best regards,
Thomas.
Dear "FIXED-TERM Seeh Thomas (BEG/EMS1)",
In message <6e9d235b18ce694399d781f05d9c42e79f0c2...@si-mbx11.de.bosch.com> you
wrote:
>
> I'll try to run a 2.6.31-rc7 kernel on my Lite5200 board.
Is this really a Lite5200, or is it a Lite5200B?
Hint: if U-Boot prints something like "CPU: MPC5200B v2.2, Core v1.4"
then its a 5200B, and thus a Lite5200 board.
> For the device tree I use lite5200.dts and compiled it simply with
>
> make ARCH=powerpc CROSS_COMPILE=ppc_6xx- lite5200.dtb
For a Lite5200B you should use the lite5200b device tree.
> But I'm not sure what configuration for the kernel I should choose. There is
> no
> lite5200_defconfig only one for the lite5200b.
Rigth. Because there are virtually no lite5200 boards out there.
> I tried it with mpc5200_defconfig and lite5200b_defconfig, but I'm not sure
> which
> is the right way.
Both will work. On a Lite5200 board I would use lite5200b_defconfig,
though.
> For compiling the kernel I use:
>
> make ARCH=powerpc CROSS_COMPILE=ppc_6xx- "CONFIG_FILE"
That's:
make ARCH=powerpc CROSS_COMPILE=ppc_6xx- mrproper
make ARCH=powerpc CROSS_COMPILE=ppc_6xx- 52xx/lite5200b_defconfig
> make ARCH=powerpc CROSS_COMPILE=ppc_6xx- uImage
> make ARCH=powerpc CROSS_COMPILE=ppc_6xx- modules
> make ARCH=powerpc CROSS_COMPILE=ppc_6xx- modules_install
> I use U-Boot 2009.06, with the following settings for bootup:
Looks as if you have a Rev. B CPU with the wrong device tree.
Unfortunaltey you omit the interesting part (i. e. the U-Boot boot
message) which would contain this important piece of information.
> --_000_6E9D235B18CE694399D781F05D9C42E79F0C2C12SIMBX11deboschc_
> Content-Type: text/html; charset"iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
And *please* do not post HTML to mailing lists. Never ever do that.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
If I ever needed a brain transplant, I'd choose a teenager's because
I'd want a brain that had never been used.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
