On Aug 18, 2009, at 6:28 PM, Anton Vorontsov wrote:
- Add gpio-controller node for BCSR17, it is used to control USB
speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.
NOTE: QE USB doesn't work on prototype boards, but should work on
pilot boards if specs and schematics are correct, though we
don't have the pilot boards to actually test it.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
arch/powerpc/boot/dts/mpc8569mds.dts | 45 ++++++++++++++++++++
+++++++++
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 ++
2 files changed, 49 insertions(+), 0 deletions(-)
applied to next.
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
