[PATCH 2/3] powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards

[Anton Vorontsov]

- Add usb node;
- Configure pins and clocks;
- Enable USB function in BCSR.

The support was successfully tested using serial and ethernet gadget
drivers.

Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc8272ads.dts      |    8 ++++++++
 arch/powerpc/platforms/82xx/mpc8272_ads.c |   14 ++++++++++++++
 2 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts 
b/arch/powerpc/boot/dts/mpc8272ads.dts
index 60f3327..e802ebd 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -173,6 +173,14 @@
                                fsl,cpm-command = <0xce00000>;
                        };
 
+                       u...@11b60 {
+                               compatible = "fsl,mpc8272-cpm-usb";
+                               reg = <0x11b60 0x40 0x8b00 0x100>;
+                               interrupts = <11 8>;
+                               interrupt-parent = <&PIC>;
+                               mode = "peripheral";
+                       };
+
                        m...@10d40 {
                                device_type = "mdio";
                                compatible = "fsl,mpc8272ads-mdio-bitbang",
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c 
b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 67e2184..30394b4 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -99,6 +99,15 @@ static struct cpm_pin mpc8272_ads_pins[] = {
        /* I2C */
        {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
        {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+
+       /* USB */
+       {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+       {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+       {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 };
 
 static void __init init_ioports(void)
@@ -112,6 +121,8 @@ static void __init init_ioports(void)
 
        cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
        cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+       cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX);
+       cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX);
        cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX);
        cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX);
        cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
@@ -147,6 +158,7 @@ static void __init mpc8272_ads_setup_arch(void)
 #define BCSR1_FETH_RST         0x04000000
 #define BCSR1_RS232_EN1                0x02000000
 #define BCSR1_RS232_EN2                0x01000000
+#define BCSR3_USB_nEN          0x80000000
 #define BCSR3_FETHIEN2         0x10000000
 #define BCSR3_FETH2_RST                0x08000000
 
@@ -156,6 +168,8 @@ static void __init mpc8272_ads_setup_arch(void)
        clrbits32(&bcsr[3], BCSR3_FETHIEN2);
        setbits32(&bcsr[3], BCSR3_FETH2_RST);
 
+       clrbits32(&bcsr[3], BCSR3_USB_nEN);
+
        iounmap(bcsr);
 
        init_ioports();
-- 
1.6.3.3

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev