struct mcc defined in both immap_qe.h and immap_cpm2.h, so they will
conflic when included in a single file. The mcc struct is easy to deal
with, since it isn't used in any driver (yet), so let's just rename QE
version to qe_mcc.
The ucb_ctlr is a bit trickier, since it is used by fsl_qe_udc driver,
and the driver supports both CPM and QE UDCs, plus the QE version is
used to form a bigger immap struct.
I don't want to touch too much of USB code in this series, so for now
let's just copy most generic version into the common cpm.h header,
later we'll create cpm_usb.h where we'll place common USB structs that
are used by QE/CPM UDC and QE Host drivers (FHCI).
And as for the structs in qe.h and cpm2.h, just prefix them with qe_
and cpm_.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
arch/powerpc/include/asm/cpm.h | 22 ++++++++++++++++++++++
arch/powerpc/include/asm/immap_cpm2.h | 2 +-
arch/powerpc/include/asm/immap_qe.h | 8 ++++----
3 files changed, 27 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 24d79e3..b5f1534 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -5,6 +5,28 @@
#include <linux/types.h>
#include <linux/of.h>
+/*
+ * USB Controller pram common to QE and CPM.
+ */
+struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep[4];
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ /* Fields down below are QE-only */
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
/* Opcodes common to CPM1 and CPM2
*/
#define CPM_CR_INIT_TRX ((ushort)0x0000)
diff --git a/arch/powerpc/include/asm/immap_cpm2.h
b/arch/powerpc/include/asm/immap_cpm2.h
index d4f069b..7c64fda 100644
--- a/arch/powerpc/include/asm/immap_cpm2.h
+++ b/arch/powerpc/include/asm/immap_cpm2.h
@@ -549,7 +549,7 @@ typedef struct comm_proc {
/* USB Controller.
*/
-typedef struct usb_ctlr {
+typedef struct cpm_usb_ctlr {
u8 usb_usmod;
u8 usb_usadr;
u8 usb_uscom;
diff --git a/arch/powerpc/include/asm/immap_qe.h
b/arch/powerpc/include/asm/immap_qe.h
index c346d0b..4e10f50 100644
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -210,7 +210,7 @@ struct sir {
} __attribute__ ((packed));
/* USB Controller */
-struct usb_ctlr {
+struct qe_usb_ctlr {
u8 usb_usmod;
u8 usb_usadr;
u8 usb_uscom;
@@ -229,7 +229,7 @@ struct usb_ctlr {
} __attribute__ ((packed));
/* MCC */
-struct mcc {
+struct qe_mcc {
__be32 mcce; /* MCC event register */
__be32 mccm; /* MCC mask register */
__be32 mccf; /* MCC configuration register */
@@ -431,9 +431,9 @@ struct qe_immap {
struct qe_mux qmx; /* QE Multiplexer */
struct qe_timers qet; /* QE Timers */
struct spi spi[0x2]; /* spi */
- struct mcc mcc; /* mcc */
+ struct qe_mcc mcc; /* mcc */
struct qe_brg brg; /* brg */
- struct usb_ctlr usb; /* USB */
+ struct qe_usb_ctlr usb; /* USB */
struct si1 si1; /* SI */
u8 res11[0x800];
struct sir sir; /* SI Routing Tables */
--
1.6.3.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
