From: Liang Li <liang...@windriver.com>

There is 8MB flash, 8kB EEPROM and 128MB SDRAM on the sbc834x
local bus, so add a localbus node in DTS with MTD partitions.

The recent U-boot commit fe613cdd4eb moves u-boot to the beginning
of flash, hence the legacy label on the partition at the end of flash.

Signed-off-by: Liang Li <liang...@windriver.com>
Signed-off-by: Yang Shi <yang....@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortma...@windriver.com>
---
 arch/powerpc/boot/dts/sbc8349.dts |   40 +++++++++++++++++++++++++++++++++++++
 1 files changed, 40 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/sbc8349.dts 
b/arch/powerpc/boot/dts/sbc8349.dts
index d93e5be..b83036a 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -265,6 +265,46 @@
                };
        };
 
+       local...@e0005000 {
+               #address-cells = <2>;
+               #size-cells = <1>;
+               compatible = "fsl,mpc8349-localbus", "simple-bus";
+               reg = <0xe0005000 0x1000>;
+               interrupts = <77 0x8>;
+               interrupt-parent = <&ipic>;
+               ranges = <0x0 0x0 0xff800000 0x00800000         /* 8MB Flash */
+                         0x1 0x0 0xf8000000 0x00002000         /* 8KB EEPROM */
+                         0x2 0x0 0x10000000 0x04000000         /* 64MB SDRAM */
+                         0x3 0x0 0x10000000 0x04000000>;       /* 64MB SDRAM */
+
+               fl...@0,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "intel,28F640J3A", "cfi-flash";
+                       reg = <0x0 0x0 0x800000>;
+                       bank-width = <2>;
+                       device-width = <1>;
+
+                       partit...@0 {
+                               label = "u-boot";
+                               reg = <0x00000000 0x00040000>;
+                               read-only;
+                       };
+
+                       partit...@40000 {
+                               label = "user";
+                               reg = <0x00040000 0x006c0000>;
+                       };
+
+                       partit...@700000 {
+                               label = "legacy u-boot";
+                               reg = <0x00700000 0x00100000>;
+                               read-only;
+                       };
+
+               };
+       };
+
        pci0: p...@e0008500 {
                interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
                interrupt-map = <
-- 
1.6.3.3

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to