Hi, I am currently running linux 2.6.28.4 on a PPC460EX with 2 Marvell Alaska 88EIIII Ethernet transceivers connected to it. If I hold one of the transceivers in reset on power on I get the following messages when the linux kernel boots and eth0 and eth1 both work fine... eth0: EMAC-0 /plb/opb/ether...@ef600e00, MAC 00:13:a8:00:0d:c6 eth0: found Generic MII PHY (0x00) /plb/opb/emac-rg...@ef601500: input 1 in RGMII mode eth1: EMAC-1 /plb/opb/ether...@ef600f00, MAC 00:13:a8:00:0d:c7 eth1: found Generic MII PHY (0x02) Now if I don't hold one of the chips in reset (I'm doing it manually with a switch BTW) I get the following (and eth1 does not work): eth0: EMAC-0 /plb/opb/ether...@ef600e00, MAC 00:13:a8:00:0d:c6 eth0: found Generic MII PHY (0x00) /plb/opb/emac-rg...@ef601500: input 1 in RGMII mode /plb/opb/ether...@ef600f00: can't find PHY! At first I thought maybe this is a problem with u-boot, but I'm not sure now. I was going to start modifying the kernel - but thought I would ask on here first if anyone has seen this issue. Thanks for your time, Judd Gilbert
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
