MPC8377E-WLAN are basically RDB boards except:
- RAM extended to 512 MB;
- NAND flash removed, NOR flash extended to 64 MB;
- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added;
- Power management MCU removed;
- PCI slot removed, another mini-PCI slot added (IRQ routing changed);
- USB3300 PHY's ID pin grounded, thus USB port is host-only.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
arch/powerpc/boot/dts/mpc8377_wlan.dts | 464 +++++++++++++++++++++++++++++
arch/powerpc/platforms/83xx/Kconfig | 4 +-
arch/powerpc/platforms/83xx/mpc837x_rdb.c | 5 +-
3 files changed, 469 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/boot/dts/mpc8377_wlan.dts
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts
b/arch/powerpc/boot/dts/mpc8377_wlan.dts
new file mode 100644
index 0000000..3febc4e
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -0,0 +1,464 @@
+/*
+ * MPC8377E WLAN Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ * Copyright 2009 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "fsl,mpc8377wlan";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8...@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; // 512MB at 0
+ };
+
+ local...@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+ ranges = <0x0 0x0 0xfc000000 0x04000000>;
+
+ fl...@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x4000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partit...@0 {
+ reg = <0 0x8000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partit...@a0000 {
+ reg = <0xa0000 0x300000>;
+ label = "kernel";
+ };
+
+ partit...@3a0000 {
+ reg = <0x3a0000 0x3c60000>;
+ label = "rootfs";
+ };
+ };
+ };
+
+ i...@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ w...@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ gpio1: gpio-control...@c00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x100>;
+ interrupts = <74 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ gpio2: gpio-control...@d00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+ reg = <0xd00 0x100>;
+ interrupts = <75 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
+
+ i...@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ a...@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+
+ r...@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ sd...@2e000 {
+ compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <133333333>;
+ };
+ };
+
+ i...@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <15 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ s...@7000 {
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
+ mode = "cpu";
+ };
+
+ d...@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-chan...@0 {
+ compatible = "fsl,mpc8377-dma-channel",
"fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-chan...@80 {
+ compatible = "fsl,mpc8377-dma-channel",
"fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-chan...@100 {
+ compatible = "fsl,mpc8377-dma-channel",
"fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-chan...@180 {
+ compatible = "fsl,mpc8377-dma-channel",
"fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ cell-index = <3>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
+ u...@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <38 0x8>;
+ phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
+ };
+
+ enet0: ether...@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <32 0x8 33 0x8 34 0x8>;
+ phy-connection-type = "mii";
+ interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ m...@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-...@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-...@3 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-...@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ether...@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 0x8 36 0x8 37 0x8>;
+ phy-connection-type = "mii";
+ interrupt-parent = <&ipic>;
+ phy-handle = <&phy3>;
+ tbi-handle = <&tbi1>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ m...@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-...@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ serial0: ser...@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <9 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ serial1: ser...@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ cry...@30000 {
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ sleep = <&pmc 0x03000000>;
+ };
+
+ s...@18000 {
+ compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ interrupts = <44 0x8>;
+ interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
+ };
+
+ s...@19000 {
+ compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ interrupts = <45 0x8>;
+ interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: interrupt-control...@700 {
+ compatible = "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ };
+
+ pmc: po...@b00 {
+ compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
+
+ pci0: p...@e0008500 {
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 =
0x17 */
+
+ /* IDSEL AD14 IRQ6 inta */
+ 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+ /* IDSEL AD15 IRQ5 inta */
+ 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0 0>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access
registers */
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+
+ pci1: p...@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
+ clock-frequency = <0>;
+
+ p...@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa8000000
+ 0x02000000 0 0xa8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: p...@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
+ clock-frequency = <0>;
+
+ p...@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc8000000
+ 0x02000000 0 0xc8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+};
diff --git a/arch/powerpc/platforms/83xx/Kconfig
b/arch/powerpc/platforms/83xx/Kconfig
index 083ebee..f49a254 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -75,11 +75,11 @@ config MPC837x_MDS
This option enables support for the MPC837x MDS Processor Board.
config MPC837x_RDB
- bool "Freescale MPC837x RDB"
+ bool "Freescale MPC837x RDB/WLAN"
select DEFAULT_UIMAGE
select PPC_MPC837x
help
- This option enables support for the MPC837x RDB Board.
+ This option enables support for the MPC837x RDB and WLAN Boards.
config SBC834x
bool "Wind River SBC834x"
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 76f3b32..91d19ab 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -86,11 +86,12 @@ static int __init mpc837x_rdb_probe(void)
return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") ||
of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") ||
- of_flat_dt_is_compatible(root, "fsl,mpc8379rdb");
+ of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") ||
+ of_flat_dt_is_compatible(root, "fsl,mpc8377wlan");
}
define_machine(mpc837x_rdb) {
- .name = "MPC837x RDB",
+ .name = "MPC837x RDB/WLAN",
.probe = mpc837x_rdb_probe,
.setup_arch = mpc837x_rdb_setup_arch,
.init_IRQ = mpc837x_rdb_init_IRQ,
--
1.6.3.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
