From: Anton Vorontsov <avoront...@ru.mvista.com>
Since commit fe192a49118f5b1272317d60c7930ece4e13ae49 ("Rework gianfar
driver to use of_mdio infrastructure") the fixed-link support is
broken, the driver oopses at init_phy():
Unable to handle kernel paging request for data at address 0x000000e4
Faulting instruction address: 0xc01cf298
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01cf298] init_phy+0x80/0xdc
LR [c01cf250] init_phy+0x38/0xdc
Call Trace:
[cf81fe80] [c01d1cf8] gfar_enet_open+0x6c/0x19c
[cf81fea0] [c024494c] dev_open+0xfc/0x134
[cf81fec0] [c0242edc] dev_change_flags+0x84/0x1ac
[cf81fee0] [c0399ee0] ic_open_devs+0x168/0x2d8
[cf81ff20] [c039b2e8] ip_auto_config+0x90/0x2a4
[cf81ff60] [c0003884] do_one_initcall+0x34/0x1a8
This patch fixes the oops, and removes phy_node checks, and adds a call
to of_phy_connect_fixed_link() if a phy isn't attached..
Also, remove an old fixed-link code that we don't use any longer.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
Signed-off-by: Grant Likely <grant.lik...@secretlab.ca>
---
drivers/net/gianfar.c | 24 ++++++++----------------
1 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 4ae1d25..79fcc2c 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -262,15 +262,6 @@ static int gfar_of_init(struct net_device *dev)
priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
- if (!priv->phy_node) {
- u32 *fixed_link;
-
- fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
- if (!fixed_link) {
- err = -ENODEV;
- goto err_out;
- }
- }
/* Find the TBI PHY. If it's not there, we don't support SGMII */
priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -657,13 +648,14 @@ static int init_phy(struct net_device *dev)
interface = gfar_get_interface(dev);
- if (priv->phy_node) {
- priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
- 0, interface);
- if (!priv->phydev) {
- dev_err(&dev->dev, "error: Could not attach to PHY\n");
- return -ENODEV;
- }
+ priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
+ interface);
+ if (!priv->phydev)
+ priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+ interface);
+ if (!priv->phydev) {
+ dev_err(&dev->dev, "could not attach to PHY\n");
+ return -ENODEV;
}
if (interface == PHY_INTERFACE_MODE_SGMII)
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
