Inspired by the patch for 8139too (bda6a15a).
Currently we can't set mac address on a running ucc_geth device.
But this is needed when you use this device as a bonding slave in
bonding device in balance-alb mode. So add this feature for ucc_geth
device.
Signed-off-by: Kevin Hao <kexin....@windriver.com>
---
drivers/net/ucc_geth.c | 33 ++++++++++++++++++++++++++++++++-
1 files changed, 32 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 9dd16c9..3c595d7 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3339,6 +3339,37 @@ static void ucc_netpoll(struct net_device *dev)
}
#endif /* CONFIG_NET_POLL_CONTROLLER */
+static int ucc_geth_set_mac_addr(struct net_device *dev, void *p)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ /*
+ * If device is not running, we will set mac addr register
+ * when opening the device.
+ */
+ if (!netif_running(dev))
+ return 0;
+
+ spin_lock_irq(&ugeth->lock);
+ init_mac_station_addr_regs(dev->dev_addr[0],
+ dev->dev_addr[1],
+ dev->dev_addr[2],
+ dev->dev_addr[3],
+ dev->dev_addr[4],
+ dev->dev_addr[5],
+ &ugeth->ug_regs->macstnaddr1,
+ &ugeth->ug_regs->macstnaddr2);
+ spin_unlock_irq(&ugeth->lock);
+
+ return 0;
+}
+
/* Called when something needs to use the ethernet device */
/* Returns 0 for success. */
static int ucc_geth_open(struct net_device *dev)
@@ -3515,7 +3546,7 @@ static const struct net_device_ops ucc_geth_netdev_ops = {
.ndo_stop = ucc_geth_close,
.ndo_start_xmit = ucc_geth_start_xmit,
.ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_mac_address = ucc_geth_set_mac_addr,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_multicast_list = ucc_geth_set_multi,
.ndo_tx_timeout = ucc_geth_timeout,
--
1.6.0.4.771.gef3b3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
