On Wednesday 15 April 2009 14:17:47 you wrote: > On Wed, Apr 15, 2009 at 1:23 PM, Zhivko Yordanov <jivk...@uni-kassel.de> wrote: > > Hello, > > > > I'm on designing of a new embedded board, based on mpc6841d and South > > Bridge ULi M1575. As а reference design, I use Freescale HPCN board. > > However after consult with chip's distributor, it became clear that the > > M1575 is already discounted. Now I'm in looking of an another solution. > > Can somebody recommend me an alternative, good supported from u-boot and > > have SATA, USB, Audio on it? The chip must be connected with mpc6841d > > over PCI-Express. > > > > Best regarsds, > > > > Yordanov > > _______________________________________________ > > Linuxppc-dev mailing list > > Linuxppc-dev@ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-dev > > I think the only alternatives you have are chips from Via and perhaps > Sis. It looks like Via has some nice south bridges which do what you > want, see: > http://www.via.com.tw/en/products/chipsets/south-bridges.jsp > > Roderick
Thank you for the anser! Unfortunately VIA and SIS uses own connection bus between North and Sout bridges - V-map and MuTiol. I found AMD's SB600 and SB7x0 bridges, that seems to connect through PCI-Express. Are they from u-boot spupported? Best regards _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
