On Tue, Mar 31, 2009 at 04:30:26PM -0400, Matthew L. Creech wrote: > (Sorry if this is a dupe, but I think my first attempt was filtered out)
No, it's a dupe. :-) > I'm trying to get Linux booting on a custom board based on the MPC8313 > ERDB, but there's no output after the console is transferred. I get > the following: [snip] > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 16) is a 16550A > console handover: boot [udbg0] -> real [ttyS0] > serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 17) is a 16550A Make sure that u-boot for your board (or whatever you're using) is properly filling in the clock-frequency property of the serial port nodes. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
