I have a little problem with my boot messages. I'm not sure what this is, but does anyone have any ideas as to what it could be or what further information I could give to help track this down. As of now this is not manifesting itself, but I don't know what it might do.
Using MPC831x RDB machine description Linux version 2.6.27 (r...@localhost.localdomain) (gcc version 4.2.2) #1 Fri Feb 6 15:06:45 PST 2009 console [udbg0] enabled setup_arch: bootmem mpc831x_rdb_setup_arch() Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware bus number: 0->0 PCI host bridge /sleep-nexus/p...@e0008500 (primary) ranges: MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 Prefetch IO 0x00000000e2000000..0x00000000e20fffff -> 0x0000000000000000 arch: exit Zone PFN ranges: DMA 0x00000000 -> 0x00008000 Normal 0x00008000 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00008000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 rw console=ttyS0,115200 IPIC (128 IRQ sources) at fdefa700 PID hash table entries: 512 (order: 9, 2048 bytes) clocksource: timebase mult[7800001] shift[22] registered Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 125836k/131072k available (3684k kernel code, 5096k reserved, 128k data, 97k bss, 192k init) SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop... 66.56 BogoMIPS (lpj=133120) Mount-cache hash table entries: 512 net_namespace: 288 bytes NET: Registered protocol family 16 PCI: Probing PCI hardware pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:00.0: PME# disabled bus: 00 index 0 io port: [0, fffff] bus: 00 index 1 mmio: [90000000, 9fffffff] bus: 00 index 2 mmio: [80000000, 8fffffff] SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered NET: Registered protocol family 1 ------------[ cut here ]------------ Badness at c00bdebc [verbose debug info unavailable] NIP: c00bdebc LR: c00bdea4 CTR: 00000000 REGS: c7827d90 TRAP: 0700 Not tainted (2.6.27) MSR: 00029032 <EE,ME,IR,DR> CR: 22022042 XER: 20000000 TASK = c7816400[1] 'swapper' THREAD: c7826000 GPR00: c00bdea4 c7827e40 c7816400 ffffffef c7800dcc c7800afc c7811540 00000000 GPR08: 000001e0 c03c0000 00000040 00000000 82044048 10101400 07ffb000 00000000 GPR16: 07ff0350 07ff59b4 00000000 00000000 00000000 c03ac84c c03ac820 c7857210 GPR24: 00000000 00000000 00000000 00000001 c7811540 fffffffe c78b4480 c7827e58 NIP [c00bdebc] sysfs_add_one+0x28/0x30 LR [c00bdea4] sysfs_add_one+0x10/0x30 Call Trace: [c7827e40] [c00bdea4] sysfs_add_one+0x10/0x30 (unreliable) [c7827e50] [c00bf12c] sysfs_do_create_link+0xac/0x15c [c7827e80] [c01a09b4] bus_add_device+0xf4/0x190 [c7827ea0] [c019f1a0] device_add+0x38c/0x5c8 [c7827ef0] [c0225db4] of_device_register+0x24/0x34 [c7827f00] [c0009844] of_platform_device_create+0x44/0x74 [c7827f10] [c00098ec] of_platform_bus_create+0x78/0xc8 [c7827f30] [c0009a5c] of_platform_bus_probe+0x120/0x150 [c7827f50] [c037a3e4] __machine_initcall_mpc831x_rdb_declare_of_platform_devices+0x4c/0x60 [c7827f60] [c0003874] do_one_initcall+0x38/0x188 [c7827fd0] [c036917c] kernel_init+0x88/0xf4 [c7827ff0] [c0011b10] kernel_thread+0x44/0x60 Instruction dump: 912b0028 4bffffbc 9421fff0 7c0802a6 90010014 4bffff2d 2f83ffef 419e0014 80010014 38210010 7c0803a6 4e800020 <0fe00000> 4bffffec 9421ffe0 7c0802a6 JFFS2 version 2.2. (NAND) .. 2001-2006 Red Hat, Inc. msgmni has been set to 246 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 16) is a 16550A console handover: boot [udbg0] -> real [ttyS0] serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 17) is a 16550A brd: module loaded loop: module loaded Gianfar MII Bus: probed eth0: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:95:01 eth0: Running with NAPI enabled eth0: 256/256 RX/TX BD ring size NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) nand_bbt: ECC error while reading bad block table cmdlinepart partition parsing not available RedBoot partition parsing not available Creating 3 MTD partitions on "e2800000.flash": 0x00000000-0x00200000 : "u-boot" 0x00200000-0x00800000 : "kernel" 0x00800000-0x04000000 : "fs" eLBC NAND device at 0xe2800000, bank 0 usbmon: debugfs is not available fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 38, io base 0xe0023000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected USB Universal Host Controller Interface driver v3.0 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i2c /dev entries driver md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. Empty flash at 0x004dbca8 ends at 0x004dc000 Empty flash at 0x01381ad8 ends at 0x01382000 Empty flash at 0x01383264 ends at 0x01383800 Empty flash at 0x015a9048 ends at 0x015a9800 Empty flash at 0x015aa990 ends at 0x015ab000 Empty flash at 0x015ba24c ends at 0x015ba800 VFS: Mounted root (jffs2 filesystem). Freeing unused kernel memory: 192k init Thanks for the help. Ron _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev