Sorry, I'm a late comer here, but I might have an idea. First off, I don't see
below what
kernel version you are using? I may have missed it somewhere.
[dj]
Sorry I should have mentioned that earlier. I'm using 2.6.29-rc5 (pulled couple
of days ago)
Hmm, well, the first thing I catch is this is an old dts format. Depending on
your kernel version, you
may want to comply with the dts v1 spec. The v1 spec is much more strict on
the format of the values
that are provided for the properties.
[dj]
I've fixed that since. Thanks.
phy0: ethernet-...@0 {
interrupt-parent = <&ipic>;
interrupts = <3 8>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-...@1 {
interrupt-parent = <&ipic>;
interrupts = <3 8>;
reg = <1>;
device_type = "ethernet-phy";
};
};
Are you sure both PHY's use interrupt 3? I would think not.
[dj]
I need to follow that through and see.
Also is top posting ok? I haven't figured out how to enable '>' on bloody
Microsoft Outlook, for incoming plain text messages.
I'm a little new to this list, but in general top posting is frowned upon.
Unfortunately, I can't help you with the Outlook problem.
I can tell you that not being able to determine what part of a message came
when is extremely annoying. I hope you find a fix
for it. Or, you could try Thunderbird :)
[dj]
I'm using the HTML format. I've tagged my comments just in case the context is
lost.
Consequently, I found, some further insights into the issue. Here's a debug
output.
[ 7.124188] {
[ 7.143107] bus_id=m...@24520:00 < - -
printed in drivers/net/phy/phy_device.c : phy_connect()
[ 7.181907] match check m...@24520:1f < - - printed in
drivers/base/bus.c : match_name()
[ 7.225946] m...@24520:00 not found
[ 7.267883] }
Where does the :1f or :00 get added?
Thanks
D
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
