Is there a /dev/ttyUL0 in your root filesystem? On Fri, Feb 13, 2009 at 10:10 AM, Li Jun (Aaron) <aaronlee...@gmail.com> wrote: > Hi, > > When I try to boot the linux on the Xilinx virtex4 fx ml403 board. > > > > The information below shows up: > > ----------------------------------------------------------------------------- > > Welcome to ML403 Linux 2.6 > > > > Starting system... > > mounting /proc: done. > > Mounting '/' read-write: done. > > brining up loopback interface: done. > > Mounting /tmp: done. > > Starting syslogd: done. > > Starting klogd: done. > > Starting inetd: done. > > System started. > > starting pid 158, tty '': '/sbin/getty' > > process '/sbin/getty -L ttyUL0 9600 vt100' (pid 158) exited. Scheduling it > for r > > estart. > > starting pid 163, tty '': '/sbin/getty' > > process '/sbin/getty -L ttyUL0 9600 vt100' (pid 163) exited. Scheduling it > for r > > estart. > > starting pid 168, tty '': '/sbin/getty' > > -------------------------------------------------------------------------------------------------- > > I am using the uart lite 9600, and the inittab of my root file system is as > below: > > ::sysinit:/etc/init.d/rcS > > #::askfirst:-/bin/sh > > ::ctrlaltdel:/sbin/reboot > > ::shutdown:/sbin/swapoff -a > > ::shutdown:/bin/umount -a -r > > ::restart:/sbin/init > > ::respawn:/sbin/getty -L ttyUL0 9600 vt100 > > > > Anybody can help? > > > > Thanks! > > > > Best regards, > > Li Jun > > > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev >
-- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
