Dear "Shubhada Pugaonkar", In message <8a71b368a89016469f72cd08050ad33402d57...@maui.asicdesigners.com> you wrote: > > I am trying to bringup AMCC ppc440sPE board with 2.6.23.10 kernel from
2.6.23.10 is very old. Please use current code. 2.6.23 was long before the switch to arch/powerpc, so all the efforts you are spnding now on this old stuff are really wasted. Use at least 2.6.28 or later. > kernel.org. My .config file is attached. I used ARCH=ppc and Why don't you start with a good, known to work kernel config file like 44x/katmai_defconfig ? For example, you mention a 440SPe processor above, but your config file seems to be derived from a Luan board, which is 440SP (not SPe) so there is not much surprise if it doesn't work. > CROSS_COMPILE=ppc-linux- (also tried ppc_4xx-) and did 'make uImage', > but unable to boot into the kernel. My nfs and uboot settings seem to be > correct. The kernel gets stuck as shown below. Any help appreciated. > Please let me know if any more information is required. In the first place, please use current code. Second - which exact board is this? Katmai? > => run flash_nfs What exactly are your environment settings? Which exact value of "bootargs" do you pass to Linux? Does it include a valid console= argument? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "If you'll excuse me a minute, I'm going to have a cup of coffee." - broadcast from Apollo 11's LEM, "Eagle", to Johnson Space Center, Houston July 20, 1969, 7:27 P.M. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
