This is the InterControl custom device based on the MPC5200B chip.
Signed-off-by: Grzegorz Bernacki <g...@semihalf.com>
---
Version 2:
- change name in DTS and remove unnecessary fields
- use mpc5200_simple.c file instead of dedicated file for digsy_mtc
- update mpc5200_defconfig:
- add support for RTC (ds1339)
- add support for LXT PHY
- add support for eeprom AT24
- add support for MTD partitioning based on OF description
- some updates automatically generated by 'make menuconfig'
arch/powerpc/boot/dts/digsy_mtc.dts | 278 ++++++++++++++++++++++++++
arch/powerpc/configs/mpc5200_defconfig | 176 +++++++++++++---
arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
3 files changed, 423 insertions(+), 32 deletions(-)
create mode 100644 arch/powerpc/boot/dts/digsy_mtc.dts
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts
b/arch/powerpc/boot/dts/digsy_mtc.dts
new file mode 100644
index 0000000..9c76c38
--- /dev/null
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -0,0 +1,278 @@
+/*
+ * Digsy MTC board Device Tree Source
+ *
+ * Copyright (C) 2009 Semihalf
+ *
+ * Based on the CM5200 by M. Balakowicz
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "intercontrol,digsy-mtc";
+ compatible = "intercontrol,digsy-mtc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5...@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>; // 32MB
+ };
+
+ soc5...@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ c...@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-control...@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ ti...@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,has-wdt;
+ };
+
+ ti...@610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ti...@620 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ti...@630 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ti...@640 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ti...@650 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ti...@660 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ti...@670 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ g...@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ g...@c00 {
+ compatible =
"fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ s...@f00 {
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ u...@1000 {
+ compatible =
"fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ dma-control...@1200 {
+ device_type = "dma-controller";
+ compatible =
"fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ x...@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ ser...@2400 { // PSC3
+ device_type = "serial";
+ compatible =
"fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ cell-index = <2>;
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ser...@2600 { // PSC4
+ device_type = "serial";
+ compatible =
"fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ cell-index = <3>;
+ reg = <0x2600 0x100>;
+ interrupts = <2 11 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ether...@3000 {
+ device_type = "network";
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ m...@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need
to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command
finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0: ethernet-...@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
+ };
+
+ a...@3a00 {
+ device_type = "ata";
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i...@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible =
"fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ cell-index = <0>;
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+
+ r...@50 {
+ compatible = "at,24c08";
+ reg = <0x50>;
+ };
+
+ r...@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ s...@8000 {
+ compatible =
"fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ lpb {
+ model = "fsl,lpb";
+ compatible = "fsl,lpb";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xff000000 0x1000000>;
+
+ // 16-bit flash device at LocalPlus Bus CS0
+ fl...@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x1000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partit...@0 {
+ label = "kernel";
+ reg = <0x0 0x00200000>;
+ };
+ partit...@200000 {
+ label = "root";
+ reg = <0x00200000 0x00300000>;
+ };
+ partit...@500000 {
+ label = "user";
+ reg = <0x00500000 0x00a00000>;
+ };
+ partit...@f00000 {
+ label = "u-boot";
+ reg = <0x00f00000 0x100000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/configs/mpc5200_defconfig
b/arch/powerpc/configs/mpc5200_defconfig
index 5ff3de2..6e4e710 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Thu Nov 13 02:09:07 2008
+# Linux kernel version: 2.6.29-rc3
+# Mon Feb 2 16:22:08 2009
#
# CONFIG_PPC64 is not set
@@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
@@ -72,10 +72,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -89,6 +98,7 @@ CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
@@ -108,7 +118,6 @@ CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,7 +128,6 @@ CONFIG_HAVE_CLK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -127,11 +135,9 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,7 +153,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
@@ -192,7 +197,7 @@ CONFIG_RTAS_PROC=y
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
CONFIG_PPC_BESTCOMM_FEC=y
-CONFIG_PPC_BESTCOMM_GEN_BD=y
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
@@ -220,6 +225,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -231,12 +237,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +272,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -286,6 +295,7 @@ CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -342,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -354,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -376,9 +388,10 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
@@ -447,6 +460,12 @@ CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -474,13 +493,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -539,6 +564,8 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -652,13 +679,16 @@ CONFIG_PHYLIB=y
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
+CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -693,6 +723,10 @@ CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_IWLWIFI_LEDS is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -774,17 +808,18 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_RTAS is not set
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_BOOTCOUNT is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
@@ -843,9 +878,9 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
+# CONFIG_SENSORS_24C01A is not set
+# CONFIG_SENSORS_AD7416 is not set
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
@@ -874,10 +909,12 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FM75 is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
@@ -894,6 +931,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
@@ -906,6 +944,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1115 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
@@ -925,9 +964,11 @@ CONFIG_WATCHDOG=y
#
# Watchdog Device Drivers
#
+# CONFIG_WD is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_MPC5200_WDT is not set
+# CONFIG_WDT_CHAIN is not set
# CONFIG_WATCHDOG_RTAS is not set
#
@@ -953,10 +994,12 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
@@ -1011,6 +1054,7 @@ CONFIG_FB_MODE_HELPERS=y
#
# Frame buffer hardware drivers
#
+# CONFIG_FB_MB86290 is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
@@ -1051,7 +1095,7 @@ CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
@@ -1093,21 +1137,22 @@ CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
@@ -1137,6 +1182,7 @@ CONFIG_USB_MON=y
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
@@ -1164,18 +1210,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1222,6 +1267,10 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1239,11 +1288,64 @@ CONFIG_NEW_LEDS=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -1264,6 +1366,7 @@ CONFIG_FS_MBCACHE=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1300,10 +1403,7 @@ CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1322,7 +1422,9 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_YAFFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1403,6 +1505,7 @@ CONFIG_NLS_ISO8859_1=y
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -1454,6 +1557,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1462,6 +1566,8 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
@@ -1470,11 +1576,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
@@ -1501,11 +1609,15 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c
b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index a3bda0b..d5e1471 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static char *board[] __initdata = {
+ "intercontrol,digsy-mtc",
"promess,motionpro",
"phytec,pcm030",
"schindler,cm5200",
--
1.6.0.6
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
